What should I pay attention to when installing the horizontal waste paper baler?
Author : admin
Time : 2018-12-03
AllPageView : 52
Whether the horizontal waste paper baler can operate normally should start from the initial installation of the baler. If the horizontal waste paper baler is installed without any installation, then the normal operation is carried out. The following is the horizontal baler should pay attention to during installation. What time is it:
1. Construction and installation with reference to the foundation map. If the foundation and drawings are incorrect, adjustments should be made. In order to avoid the normal operation of the equipment after installation.
2. After the installation of the mainframe, the level should be adjusted. The horizontality error is not more than 0.1mm/m. It can be adjusted by angle iron and iron plate. After adjusting the level, it is welded with angle iron, oblique iron and waste paper.
3. The viewing platform and the loading port need to be tight and firm when installing. The welding port needs to be knocked out of the welding slag, smoothed and sprayed with anti-rust paint.
4. Introduce electric wires and use plastic pipes to bury them or erect them at high altitude to prevent high voltage electric shock. And often check the safety of the circuit, found that damage and aging need to be replaced with time.
5. Inject 46# anti-wear hydraulic oil (added to 80-90% of the tank volume), and often filter and replace the hydraulic oil as required.
6. Indoor waste paper packaging machinery needs to pay attention to ventilation and heat dissipation, outdoor installation needs to pay attention to moisture and rain.