Shaanxi Nick Machinery
Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:RongHao Industry Garden,Xi'an,Shaanxi,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Company News Your current location:Home >> Company News
  • The automatic waste paper hydraulic baler is believed to be very familiar to everyone. Today we will introduce the impact of the automatic waste paper hydraulic baler on the environment.
    The automatic waste paper hydraulic baler is very important for the environmental protection cause. We need to make an environmentally-friendly waste paper baler. At present, wood pulp for papermaking is mainly derived from natural forests in China. The large consumption of paper not only causes a sharp decrease in the forest area, but also causes serious pollution of rivers and lakes due to the discharge of sewage from pulp production. The wear of the fully automatic waste paper hydraulic baler within the permissible limits specified by the design becomes normal wear of the waste paper baler. This wear is generally in the initial stage, because the new friction surface has a certain roughness, the real contact surface is small, and the wear is relatively fast, which is called the run and the stage. As the surface gradually flattens and the actual contact area increases, the waste paper baler gradually enters a normal stable wear phase, and the wear of the friction surface is slight and slow and stable.
    Many baler manufacturers have seized this opportunity, using high-tech achievements, gradually improving the performance of fully automatic waste paper baler equipment, and developing more comprehensive equipment, showing its obvious advantages, let more Users are getting more and more recognized!
    Although we have made great progress in production technology through the joint efforts of manufacturers of fully automatic waste paper hydraulic balers, we cannot be complacent, and the automatic waste paper hydraulic baler has a very large upside, so we We must continue to learn advanced production technology and advanced production concepts at home and abroad to create more professional automatic waste paper baler equipment. The oil leakage of the fully automatic waste paper hydraulic baler is more serious. If the oil pump pressure is adjusted too high, the wear of the moving parts will increase the sealing gap, the sealing device will be damaged, and the viscosity of the oil used in the waste paper hydraulic baler will be too low, which will increase the leakage. After identifying the cause, take appropriate measures to eliminate it.
  • The dust removing device of the waste paper baler comprises at least one nozzle. The inner side of the packaging frame of the waste paper baler is provided with a mounting cavity, the nozzle is installed in the mounting cavity, and the nozzle corresponds to the pressing cavity. The conveying device is a belt conveying device, and the adsorption device is a fan.

    Compared with the prior art, the waste paperboard baler adopts an adsorption device to suck the waste paper on the die-cutting table into the packaging device through the pipeline, and has a dustproof device in the packaging device, which can avoid packaging of the waste cardboard packaging machine. Dust interference occurs in the process, and the whole has the characteristics of high packing efficiency and high product quality.

    The packing device comprises a packing frame, a pressing bar and a bottom plate, wherein the packaging frame of the waste paper baler is provided with a pressing chamber, and the pressing bar is movable up and down to be mounted on an upper portion of the pressing chamber, and the bottom plate is movably mounted on the bottom plate At the bottom of the packaging frame, one side of the packaging frame is further provided with an opening communicating with the pipe, and the other side of the packaging frame is further provided with a plurality of plate holes, and the adsorption device is mounted on the packaging frame on one side of the plate hole.as more information ,please visit: www.nkbaler.com
  • With the increasing awareness of environmental protection, the hydraulic baler plays a big role. It can reuse some waste paper, and it is more and more popular with everyone. Our company's hydraulic waste paper baler has been continuously researched and developed. Innovation, constantly following the development of some advanced foreign technology, advancing with the times, to create the most practical, most assured, most advanced hydraulic packaging machinery for domestic environmental protection.

    The company insists on perfecting and deepening quality management Keeping pace with the times The first-class quality of the foundry industry~ quality assurance, quality problems in one year warranty, replacement, return and bear the packaging and transportation costs of accessories. Welcome new and old customers to purchase ~ Let's take a look at the operation process of the hydraulic waste paper baler:
    1. This is mainly used for the packaging and use of waste paper, and the operator must operate according to the operating procedures.
    2. Check the circuit for misconnection or leakage before starting the hydraulic pump.
    3. If abnormality is found, stop the operation immediately and eliminate the cause.
    4. Hydraulic fluid must be added to the specified oil level line (46# hydraulic oil) before use.
    5. When packing, the operator must pay attention to safety, evenly spread the paper, and place the paper in place. The upper lid door should be closed to start packing.
    6. When packing, the hydraulic handle should be quickly pushed to the specified position to prevent the hydraulic handle from being quickly pushed to the specified position when the valve is packed. When the package is taken, the hydraulic handle should be quickly pushed to the specified position and the hydraulic oil flow is not enough, resulting in the motor passing. The flow causes the motor to overcurrent. Blockage and insufficient hydraulic oil flow cause the motor to over-current.
    7. When the cover cylinder handle is pulled to the return position, the reverse handle is pushed.
    8. All hydraulic rods must be retracted into the hydraulic cylinder after packing to prevent dust from damaging the seal and leaking oil.
    9. Every anti-package around the hydraulic reverse board should be cleaned in time to prevent jamming.
    10. Regular maintenance work should be done, and the oil pipe should be found in the place where it leaks.
    11. When adjusting the pump, valve and pressure gauge, it must be carried out by experienced technicians. If the pressure gauge is found to be faulty, it should be repaired or replaced immediately.
    12. Do not know the main machine structure, performance and operating procedures. When multiple people operate at the same time, the division of labor should be clear to avoid the danger of misuse.
    13. After the door is opened, it is strictly forbidden to operate the door to prevent accidents.
    14. When running or packing, do not repair or touch the moving parts by hand. Do not press the material in the bin with your hands or feet.
    15. Nick company waste paper baler oil pressure: no pressure adjustment is allowed, the operator must work under the oil pressure, the highest pressure limit 30MPa.
    16. The oil in the tank must be strictly filtered and always maintain a sufficient amount of oil. The tank should be cleaned and replaced once every six months.
    17. Lubrication should be filled at least once a day as required, and the debris in the chamber should be cleaned once per shift.
    18. Stop the machine immediately if there is a serious oil leak or an abnormality in the work. Do not look at the place where the oil is sprayed. Do not directly block it by hand. Do not force the disease to run.
    19. Use 46# anti-abrasion oil, always pay attention to oil temperature, stop when it exceeds 70 degrees.

    as more information ,please visit: www.nkbaler.com

  • There are many types of hydraulic waste paper balers, but we also have a lot of things to pay attention to during the process of use, which are mainly divided into the following aspects:

    First, the hydraulic baler must first use the extension cord section, and the area should be calculated according to the motor power of the hydraulic baler. Do not touch the power distribution box with wet hands, there is a risk of electric shock. Secondly, when packing water or wet items, a leakage protector should be installed to protect it. Always use gloves, protective glasses, and a mask when installing or packaging. If not used, it may cause injury or health hazard.

    Third, the machine is a baler that uses a strap on the packaged object. Do not use for other purposes. Packaged items are items that need to be packaged. Do not put your hand or body close to the main unit. Do not remove parts such as panels, covers, doors, etc. when using the machine. When the parts are removed, not only will the machine malfunction, but it will easily lead to ginseng accidents. Finally, the power capacity of the hydraulic baler should ensure sufficient capacity, the motor capacity is greater than 5.5KW, the plug and the socket are not easy to generate arc, and there is a danger of fire. The ground terminal must be connected to the ground wire. The grounding resistance must be less than 4 ohms. There is a risk of electric shock when it is not connected to the ground wire or is not fully connected

    as more information ,please visit: www.nkbaler.com

  • On the difference between horizontal small waste paper baler and vertical baler
    1. Different structure: small horizontal waste paper baler, the horizontal drive of the push plate, horizontal out of the package, the vertical baler pusher up and down.

    2, the feeding method is different: the small horizontal baler feeding is more convenient than the vertical baler feeding, the horizontal packing machine has a large feeding port, the feeding is more random, the car is clamped, the manual feeding can be used, and the manual workload is greatly reduced.

    3, different operating modes, horizontal baler has automatic mode, can be equipped with remote control, the operation is more convenient.

    4, the outsourcing method is different, the packaged waste paper block can realize a package pushing a package, which is convenient for centralized folder processing.

    as more information ,please visit :www.nkbaler.com

  • The waste paper baler is divided into two series: automatic and semi-automatic. It is controlled by PLC microcomputer. It is mainly used for large-scale renewable resource recycling stations, paper mills, etc. for the compression molding of waste paper boxes, newspapers, pit paper and other waste materials. The packaged waste paper has the advantages of uniform size, large specific gravity, high density and reduced volume, which greatly reduces the space occupied by waste paper and reduces storage costs and transportation costs.

    Waste paper baler features:
    1. Horizontal structure, using conveyor belt feeding, saving time and effort;
    2, button operation, PLC control, safe and reliable;
    3. The matching power is adjusted according to the machine model and actual production requirements;
    4. It can be equipped with chain plate type or belt conveyor according to user's requirements. It has large conveying capacity, anti-wear resistance, strong load capacity and anti-slip function.
    5, the package length can be set freely, the microcomputer accurately records the package value and production efficiency.
    Waste paper baler advantages:
    1. It adopts the international leading hydraulic oil circuit power system, which greatly improves the packing efficiency, and has the characteristics of fast packing speed, high efficiency, energy saving and stable performance.
    2, a variety of cooling systems for users to choose (water cooling system, air cooling system and industrial air conditioning cooling system), of which industrial air conditioning refrigeration is the exclusive patent high-tech achievements of our company's baler industry;
    3, the use of push and hook line two fast and efficient wire-laying method, fast and efficient wire-wound device, low failure rate for easy maintenance;
    4, using the mechanics principle, 3 sets of tight-packed cylinders make the compressed material tighter, the packaged package is more regular and the density is larger;

    5, touch screen console, microcomputer PLC control, simple, clear, at a glance, and with computer-assisted error correction;

    6. Adopting the first domestic introduction of double tough cutter design greatly improves the efficiency of cutting and prolongs the service life of the blade.
     

  • «
  • 1
  • 2
  • ...
  • 49
  • 50
  • 51
  • 52
  • 53
  • ...
  • 55
  • 56
  • »
  • Shaanxi Nick Machinery Equipment Co. LTD
    TEL:86-29-86031588
    Fax:86-29-86031588 Sitemap
    Add:RongHao Industry Garden,Xi'an,Shaanxi,China
    Email:sales@nkbaler.com
    WhatsApp:008615021631102
    Copyright © 2018 NKBALER .rights reserved
    Whats App Skype Shaanxi Nick Machinery
    Equipment Co. LTD