Contáctenos españa English
About Us
  Company Profile
  Company Culture
  Case Show
  News Center
Address:RongHao Industry Garden, Xi'an, Shaanxi, China
News Show   Home >> News Show
Vertical hydraulic baler hydraulic cylinder What are the problems and methods of treatment
Source: http://www.nkbaler.com Author: admin Time 2017/12/18

 Vertical hydraulic baler hydraulic cylinder What is the fault? How to solve the vertical hydraulic baler hydraulic cylinder failure? Oil pump system pressure is low, the plunger rise time is too long, the overflow pressure adjustment, return valve leakage. : Adjust the relief valve in accordance with the provisions of the flow valve pressure should be cleaned back to the oil valve or replace the spool.
    The main pump motor current is too high: the main pump motor sound is not normal, the pressure relief valve is not adjusted, the oil is too thick or too dirty, the oil level is too low, the air intake pipe into the air.Processing: Adjust the oil pressure, replace the water, add Oil, tighten intake manifold connection bolts.
    Sliding valve can not be reset, plugging phenomenon, reset spring deformation, pipeline oil is not clean, tighten the series bolt, O-ring aging. Processing methods: Type ring.
     The gap in the spool valve neutral position is too large; generation and sliding the gap is too large, the neutral position offset, cut and leak, oil compensation overload hydraulic waste baler processing methods: maintenance, replacement slip cut, the neutral position is accurate , Replacement, repair or replacement of overload cutting oil.
     Above is the Nick Machinery Co., Ltd. in Shaanxi to introduce vertical hydraulic baler hydraulic cylinder some of the problems approach, thank you for reading. www.nkbaler.com

Shaanxi Nick Machinery Equipment Co.,Ltd



Email: info@nkbaler.com

Tel: 86-29-86031588   Fax:86-29-86031588

Mobile :0086-15021631102  

Whats APP:008615021631102



Address: RongHao Industry Garden, Xi'an, Shaanxi, China

Home   |   About Us   |   Products   |   News   |   Order Tracking   |   Contact Us
  Company Name:Shaanxi Nick Machinery Equipment Co., LTD   TEL:86-29-86031588    Fax:86-29-86031588   Sitemap
Company Address:RongHao Industry Garden, Xi'an, Shaanxi, China   Email:sales@nkbaler.com      WhatsApp:008615021631102