Contáctenos españa English
About Us
  Company Profile
  Company Culture
  Case Show
  News Center
Address:RongHao Industry Garden, Xi'an, Shaanxi, China
News Show   Home >> News Show
The hydraulic system of the waste paper packer has the following aspects
Source: http://www.nkbaler.com Author: admin Time 2018/4/12

How to clean the waste paper packer oil pump With regard to the waste paper packer, it may be necessary to replace the hydraulic oil for a long period of time after the entire equipment unit is completed. The hydraulic system needs to be cleaned once. The hydraulic system cleaning of semi-automatic hydraulic balers mainly has the following aspects:

1. Organize environmental venues.

2. Use a special clean oil with low viscosity. When cleaning, add the oil to the oil tank of the hydraulic baler and heat it to 50-80 degrees Celsius.

3. Start the hydraulic pump and let it work empty. During the cleaning process, tap the tube often and gently, so that you can receive the effect of removing attachments, check the contamination of the oil filter for 20 minutes, clean the filter, and then clean it again. Repeat this time until no filter is found. Many pollutants stop.

4. For a more messy hydraulic system, each area can be cleaned separately according to the work area. It can also be connected to the hydraulic cylinder, allowing the hydraulic cylinder to reciprocate to clean the system.

5. After cleaning, clean oil must be drained as much as possible. Clean the interior of the fuel tank. Then remove the temporary cleaning circuit to restore the hydraulic baler system to normal operating conditions and participate in regular hydraulic oil.

Home   |   About Us   |   Products   |   News   |   Order Tracking   |   Contact Us
  Company Name:Shaanxi Nick Machinery Equipment Co., LTD   TEL:86-29-86031588    Fax:86-29-86031588   Sitemap
Company Address:RongHao Industry Garden, Xi'an, Shaanxi, China   Email:sales@nkbaler.com      WhatsApp:008615021631102