1. Before starting the machine, it is necessary to check whether the parts of the baler are in good condition; whether the screws and nuts of each part are loose, if any, should be tightened in time. If there are shortages of nails and hats, the repairman must be notified to deal with them in a timely manner.
2. Check for any debris in the conveyor belt. If there is debris, it must be cleaned with compressed air to blow away dust from the rails.
3. Check the tool and slide parts for lack of oil. If it is not necessary to use the drip irrigation method, use a small stick of oil and slowly drop it on top. The inverted method cannot be poured into the feeding belt, otherwise it is packed. The belt will slide.
4. If an abnormality is found during the startup process. Such as: loud sound, large vibration, odor, etc. If you can't find it, you should stop the maintenance personnel to avoid damage to the parts.
The last four points are the maintenance methods for the automatic waste paper baler. When using a waste paper baler, pay attention to the maintenance of the waste paper baler.
The automatic waste paper baler has the characteristics of good toughness, good stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment infrastructure engineering. Widely used in various waste paper mills, old materials recycling companies and other units. Suitable for packaging and recycling of used waste paper and plastic straws. It is a good device to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation costs. Automatic waste paper balers are widely used, but if maintenance is not in place, there will be some minor faults that affect the packaging process.