
In daily life, customers are always prone to problems when using
horizontal hydraulic balers. Today Nick Machinery summarizes the common problems of hydraulic balers for your reference.
1. If the oil supply is interrupted, it is likely to cause an accident. The system software should add the required type of oil to the total required in the above situation. The application oil temperature must not exceed 50-70°C.
2. The new installation of the waste paper baler has just started to clean up once a month, which lasted more than half a year. The gear oil must be filtered according to the 120-150 mesh filter device, and then added to the car fuel tank.
3. After three months, all gear oil should be pumped out and the car fuel tank should be completely cleaned.
4. After three months of normal application, the oil filter should be cleaned every quarter of the manufacturing.
5. After adjusting the overflow valve, unloading valve, limit switch, etc., measures should be taken to prevent others from running around to prevent safety accidents.
6. Non-actual operation personnel are prohibited from actual operation
7. Every year, the machinery and equipment must be carefully repaired, and all the lubricating grease in the rolling bearing should be replaced during the maintenance.
Nick Machinery provides:
horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other packaging equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!