The horizontal waste paper baler is a hydraulic compression baler that is better for fluffy materials such as waste paper shells, cardboard, paper scraps, etc., which can ensure that the finished paper bales of the baler are neat, which is conducive to storage, transportation and handling , How much do you know about installing and debugging the baler? Here is a brief introduction for everyone:
1. Installation of horizontal waste paper baler machine
: When installing the baler, choose the horizontal position, and the baler should not be installed in a place where direct sunlight. Install the baler in a well-ventilated environment, which is conducive to the heat dissipation of the baler during work.
2. Test of the power supply of the horizontal baler
: Install the power of the baler according to the instruction manual of the baler, and then turn on the power switch of the baler to check whether the baler can start normally.
3. Commissioning of the horizontal baler machine: After the power supply receives the notification, the machine will be inspected. First, adjust the speed of the baler to the bottom position, start the switch, and test to see if the baler can work normally. After the baler is running, test whether the performance of each switch of the baler can run normally and whether any equipment is abnormal during work. The packing machine is to place the packing materials in the packing box of the packing machine, and the hydraulic oil cylinder works to press it to compress and form the packing materials into high-density packing blocks. Its advantages are that the machine adopts hydraulic transmission, compact structure, simple operation, easy maintenance, reliable sealing, and no foot screws for installation. Users can customize packaging specifications and sizes according to their needs.
Installation instructions of horizontal waste paper packing machine
1. The fasteners at the connection of the oil pipe should be tightened, otherwise the air leakage will cause no pressure on the oil cylinder.
2. The oil inlet pipe and the oil return pipe are connected according to the thickness of the caliber, and the oil return pipe is returned to the oil tank.
3. The hydraulic oil (46#) in the oil tank should not be lower than 2/3 of the oil tank during the initial installation.
4. The power supply voltage is 380V. After the power supply is connected, test the rotation direction of the oil pump and the motor after the power is supplied. There is a mark on the oil pump. Turn in the marked direction. If the direction of rotation is opposite, the power supply is reversed.
5. After the oil pipe and power supply are connected, the power transmission empty machine (without filler) will be tested according to the operation process to see if there are any problems. If the operation is normal, the packing can be pressed.
Nick Baler can supply many kinds of baler machine,Waste paper baler machine,Cardboard Paper Baling Machine，For more information ,please visit : www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time