The overall planning of waste paper balers
generally takes into account the four aspects of the site:
1. The installation position of the Baler;
2. The storage area of ??waste paper before Baling Machine;
3. The storage area of ??waste paper after Baling Machine.
4. Overall planning of freight logistics labor.
Benefits of this layout:
The waste paper before Baling Machine is distributed in the innermost part of the Baling Machine station.
Since the waste paper is usually all trucks or tricycles of stockholders when the waste paper is sent in, the car is exquisite and has strong maneuverability. It can turn around and turn in the courtyard at will. It is helpful to put the scattered paper as centralized as possible and reduce Occupy land.
The baler is placed in the other corner of the inside
Once the baler is placed, it is not easy to move again, so it is placed in the corner to reduce the area. The other is placed together with the waste paper before baling, which is conducive to grabbing the car lining, reducing the scope of the car grabbing theme, and improving the work efficacy.
Place the packed waste paper close to the entrance
The basis of the packaged vehicle is a large vehicle with a length of 9.6 meters. The handling is poor and it is difficult to make a U-turn in the packaging station. If the packaged waste is piled up at the gate and accessories, the vehicle only has to be turned into the yard and installed. It can be picked up immediately after the car.
Nick Machinery recommends that the waste paper packaging site is more than 500 square meters. The stacking of raw waste paper, fine picking, the installation of the baler and the stacking of finished products all require a site. At the same time, the manufacturer’s friendly reminder: take fire prevention measures! !If you still don’t understand, please inquire about our business 86-29-86031588