The installation method of the hydraulic motor of the waste paper baler is to clean the oil passage completely according to the relevant regulations, remove dirt, oxide skin, etc.; check whether the rotation direction of the motor is the same as the direction indicated on the product.
The hydraulic motor of the waste paper baler cannot be installed by knocking. The output shaft of the hydraulic motor and the actuator shaft extension should be connected by a floating connection. It is recommended to use a flexible coupling, and the coaxiality should not exceed 0.1mm to prevent the output shaft and the actuator shaft extension from causing the appearance of axial end .waste paper baler, care should be taken to maintain the smoothness and parallelism of the connecting plate of the oil inlet and outlet to prevent damage to the sealing equipment and oil leakage. Do not remove the plastic plug on the pipeline before it is well equipped. If it is found that the oil inlet and outlet ports are not suitable for the forward and reverse rotation direction of the corresponding output shaft during the waste paper baler equipment, it can be corrected by exchanging the inlet and outlet oil pipes. The motor equipment bracket must have satisfactory rigidity to prevent oscillation when rolling.