The Nick brand waste paper baler
is simple to operate and automatically discharges the bale, which improves work efficiency. The installation of emergency stop settings makes the operation safer and perfect after-sales.
The waste paper baler is used to squeeze waste paper and similar products under normal conditions, and pack them into a special packaging tape to greatly reduce the volume, thereby reducing transportation volume, saving freight, and increasing benefits for enterprises.
Next, Nick Machinery will talk about what should be paid attention to when operating it. I hope it will be helpful to you.
1. During the operation of the waste paper baler, it is strictly forbidden to clean up materials and wipe the machine. When the materials are jammed by the machine, they should be shut down immediately for processing.
2. Two or more people should have a clear division of labor to prevent accidents caused by confusion.
3. It is strictly forbidden to twist the parts, pumps, meters and valves on the machine at will. Adjustments and repairs must be carried out by experienced technicians after being familiar with this manual.
4. After the bale is pressed in place, the bale should be tied up, and the small door can be opened after the bundling is completed to avoid danger.
5. After the small door
is closed properly, the press head can move forward and start door Baler; the operator should leave the opening angle range of the small door when the press head moves forward and packs.
The Nick brand waste paper baler is simple to operate and automatically discharges the bale, which improves work efficiency. The installation of emergency stop settings makes the operation safer and perfect after-sales.
Company website: www.nkbaler.com, Tel: 86-29-86031588