The NKB220 series bagging machine
produced by Nick Machinery is mainly used for packing and compressing wood chips, sawdust, straw, paper chips, and other similar loose fibers.
Sawdust is a very thin material, usually less than 1mm in diameter. For this reason, when choosing a baler to beat sawdust, it is best to choose a machine with a higher pressure.
Otherwise, the machine does not have enough pressure to push the material, even if it can push, the motor load is too large, which will affect the life of the machine.
Generally, the smaller the packaging material, the greater the friction between the material and the inner wall of the compression cavity of the machine during the compression and push process. Therefore, when choosing a machine, consider the size of the compression cavity while considering the pressure to facilitate The weight of the bale to meet the needs.
The larger the compression chamber means that it can hold more materials, hit larger bales, and get heavier bales weight, which requires more pressure to complete this work.
The 220 bagging machine
produced by Nick Machinery has one-key operation, compressing,
unpacking and bagging continuously complete the whole process at one time, which improves the operation convenience and production efficiency.
Welcome to our website: www.nkbaler.com
If you are interested in the waste paper baler or have any questions, please log on to our company's website: www.nkbaler.com
, or call: 86-29-86031588