Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Preparation for the Your current location:Home >> Preparation for the
Preparation for the test machine of the horizontal hydraulic baler
Author : admin Time : 2021-01-07 AllPageView : 142
Preparation for the test machine of the horizontal hydraulic baler Horizontal hydraulic baler can be applied to all light foaming and loose materials such as waste paper, waste paper boxes, waste cardboard, bark, waste plastic bags, plastic bottles.

The horizontal hydraulic baler also needs some adjustments before leaving the factory, mainly the adjustment of the common system

1 Adjustment of oil supply system
1.1 Fuel tank refueling: This system specifies the use of hydraulic oil above No. 46. When refueling, be careful not to break the filter screen with the refueling pipe. The refueling fluid must be pure and clean, and the refueling amount is 400-500 kg.
1.2 Jog the start button of the main pump motor, check the direction of the motor, if it does not match the direction of rotation marked on the pump body, change the wiring of the motor to make the direction of rotation consistent.
1.3 Start the oil pump motor for 15 minutes without load, adjust the rising height of each plunger during this period, confirm normality and perform the following work after the machine is adjusted mechanically.
1.4 Pressure, overflow and adjustment. In order to maintain the correct flow and pressure of the pressure oil entering the main cylinder of the baler, and to protect the motor from damage due to overload, it is important to adjust the overflow and unloading.
1.5 Adjust the oil pump pressure

Step on the materials to be packed into the bag box to extend the stepping cylinder to position it, and open the main oil cylinder rising valve. Tighten the oil pump relief valve adjustment knob gradually to pack the load. Observe the motor current and pressure gauge readings. When the pressure rises to 20-25Mpa, the valve adjustment knob should be fixed, and repack after unloading for recheck.

Nick Machinery’s hydraulic baler is compact, neat and beautiful, and can greatly reduce transportation costs. It is an indispensable production tool for cotton producing areas, textile companies, supermarkets, clothing factories, waste material recycling industries and other light industrial enterprises. 86-29-86031588, www.nkbaler.com.
Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD