Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Reasons for the shak Your current location:Home >> Reasons for the shak
Reasons for the shaking of tiger head scissors
Author : admin Time : 2021-01-14 AllPageView : 103
Reasons for the shaking of tiger head scissors Shaanxi Nick Machinery Equipment Co., Ltd. is a company specializing in the production of tiger head shears, gantry shears, metal balers and other environmentally friendly products for many years. It concentrates on creating professionalism, honesty creates reputation, and service creates sales. For our better tomorrow, we look forward to new and old customers. Patronage

Tiger head shear is a shearing machine in many factories. Its work efficiency is very high, and the shearing effect of various materials is very satisfactory, so in the process of using it, it is necessary to minimize its failures , So as to reduce the maintenance costs of manufacturers.

Sometimes, the work of the tiger head shears suddenly shakes. What is the reason?
1. The bearing seat of the tiger head shear has not been processed, and the two bearing seats are no longer in the same horizontal plane. This will also cause the bearing to heat up, the bearing is stuck, and the machine cannot work normally.
2. The quality of the hammers or blades is inconsistent. The weight of the hammers on the same shaft is almost the same and the quality of the hammers on the opposite shaft is the same.
3. The ground level is not handled properly, and the uneven force causes the machine to vibrate.
4. The equipment is not in place, the equipment is faulty or not installed in the bearing position, which constitutes the bearing clearance is too small. Or the inner and outer circles are not in the same rotating base, forming different concentricity.
5. Poor lubrication is one of the primary reasons for the premature damage of the tiger head shear bearing, including: not filling lubricant or lubricating oil in time; or not filling in place, improper selection, inaccurate lubrication method, etc. Recommendation: Use accurate lubricants or lubricants, and accurate filling methods.

6. Tiredness damage is a common damage method for bearings.

The above is the reason for the shaking of the tiger head shear when working. Nick Machinery reminds you: Please operate the machine according to the operating method, and safe production is the first element.
Shaanxi Nick Machinery Equipment Co., Ltd. is a company specializing in the production of tiger head shears, gantry shears, metal balers and other environmentally friendly products for many years. It concentrates on creating professionalism, honesty creates reputation, and service creates sales. For our better tomorrow, we look forward to new and old customers. Patronize.
Company website: www.nkbaler.com, Tel: 86-29-86031588
Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD