The advantages and disadvantages of the design of the fuel tank structure of the waste paper baler
What are the advantages and disadvantages of the fuel tank design of the waste paper baler
1.The distance between the suction pipe and the return pipe should be as far as possible.Separate the suction side from the return side with a partition to improve the cleanliness of the oil in the fuel tank.
2.A coarse filter should be installed at the inlet of the suction pipe.When the liquid level is low,the filter and return pipe end should be immersed in oil to prevent the hydraulic pump of the waste paper baler from sucking in air or returning the oil to the bubbles.
The return pipe port is cut at 45° and faces the tank wall.The distance between the pipe end and the bottom of the box and the wall should not be less than three times the pipe diameter.
3.In order to prevent dust from entering the waste paper baler
,the fuel tank cap and nozzle should be properly sealed.A filter should be added to the oiler.The vent must be equipped with an air filter.
Machinery's continuous innovation and development of waste paper balers
have produced suitable waste paper balers
with different characteristics for major manufacturers.