Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
The hydraulic oil te Your current location:Home >> The hydraulic oil te
The hydraulic oil temperature of the waste plastic baler will also increase
Author : admin Time : 2020-08-06 AllPageView : 303
The hydraulic oil temperature of the waste plastic baler will also increase The normal temperature of the waste plastic baler should be adjusted between 35 and 60 degrees. Summer is about to come. As the temperature rises, the temperature of the hydraulic oil of the waste plastic baler will also increase. The oil temperature is above 60 degrees, the lubricating oil Viscosity is significantly reduced, coupled with oil leakage from the sliding vane, the hydraulic components are added, and then the rate of oil temperature rise is increased. When the oil temperature exceeds 80°, because of the difference in the thermal expansion coefficient, the relative effective components of the hydraulic components are between the operating methods and methods The distance can be changed. The distance, the added oil leaks; the gap is small, the phenomenon that can be generated between the components, can not move, can constitute the mechanism of thermal deformation and damage the original accuracy.

    As the temperature of hydraulic oil increases, eliminating the influence of the surrounding environment, and the temperature of mechanical hydraulic oil increases, customers can find the reasons from the following aspects:

1.The thickness of the uncool surface deposits will form a cooling radiator, which will cause the oil temperature to be too high, the hydraulic oil tank is too low, the oil temperature is too high, and the oil temperature is too high.

    The common oil viscosity index selection of hydraulic oil brands will directly impact the normal operation of the hydraulic system. Therefore, we can only select a specific viscosity gap and change the viscosity of the hydraulic oil as little as possible. In the concrete construction, it is necessary to study hydraulic oil Selection of area and seasonality of seasons.

    In the high-pressure regulating system, the overflow valve cannot overflow normally, reducing the pressure, adding leakage, and increasing the system oil temperature. Back pressure valve returns to the hydraulic system, if the high back pressure regulating valve is also due to the high oil temperature, the oil temperature Too high. When the back pressure of the oil filter or the return line is large, due to aging, the pressure loss of the oil flow will be added, and the oil temperature will be too high.if more information ,please visit us :www.nkbaler.com 
Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD