Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
The reason for the l Your current location:Home >> The reason for the l
The reason for the low efficiency of straw silage baler?
Author : admin Time : 2021-01-28 AllPageView : 126
The reason for the low efficiency of straw silage baler? When the straw silage baler is used for a long time, it is inevitable that there will be some failures. The relatively high number of these failures is that the straw silage baler cannot work quickly. If you want to solve the failure, then we must first understand the straw silage The reason why the Baler cannot work quickly, I hope everyone can read it carefully.
1. The oil supply pressure of the oil pump of the straw silage baler cannot meet the flow demand. In order to avoid the occurrence of oil leakage, strict inspection and testing are required before operation.

2. Once the overflow valve in the straw silage baler is deformed, it will affect the main valve core blockage, the main valve core is blocked in the small opening, some pressure oil output by the baler oil pump overflows back to the fuel tank, so that the oil in the baler can enter The flow in the fulfilling element is greatly reduced, which slows down the oil supply speed.

3. The internal and external oil leakage is relatively severe. In the fast operation, the oil supply pressure is too low, but the pressure is much higher than that of the oil return circuit. When the piston seal of the Baling Press machine cylinder is damaged, the two ends of the Baling Press machine cylinder are simply caused The accident of excessive internal leakage caused the rapid movement speed of the oil cylinder of the straw silage baler to fail, and other parts of the straw silage baler also leaked oil.
4. A series of reasons such as the lubrication of the guide rail and the poor installation accuracy and poor installation accuracy of the oil cylinder in the straw silage baler have caused the frictional resistance to increase during the operation of the baler.
The above four points are the reasons why the straw silage baler can't work quickly. Do a good job of inspection and maintenance to save time, so that the baler can better serve us.
If you are interested in the above straw silage baler or have questions, please log in to our company's website: www.nkbaler.com, or call: 86-29-86031588
Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD