Nick brand waste paper baler
is recognized by many customers with high-quality qualifications and professional craftsmanship according to everyone's actual needs, and is trustworthy.
The main reason for the solenoid valve coil of the waste paper baler to burn is because the coil temperature is too high or water has entered.
The high coil temperature may be caused by the following reasons:
1. The actual voltage fluctuates too much and exceeds the rated voltage range. The general voltage deviation of the domestic paint wire is 5%, and the good manufacturer can reach 10%
2. The medium flowing in the solenoid valve may contain impurities and jam, and the force of the solenoid coil cannot open the solenoid valve, causing the solenoid coil to work all the time, the coil will heat up for a long time, and the temperature will rise, which will eventually cause the solenoid to burn.
3. The starting power of the coil is not enough, the solenoid valve always cannot be opened, the coil heats up for a long time, the temperature rises, and finally it burns down.
4. The PTC thermistor is broken, which causes the solenoid valve to not be controlled normally.
For more information about waste paper baler
models and detailed configuration requirements, please log on to the Nick Machinery website www.nkbaler.net, Tel: 86-29-86031588, best-selling models: NKW160Q, NKW200Q, and support custom-made various models of baler, welcome