What should I check after replacing the hydraulic cylinder of the waste plastic baler?
Nick brand waste plastic baler
has simple structure, stable action, simple operation, low failure rate and easy cleaning and maintenance. It is a good helper for your production.
When the maintenance personnel disassemble the hydraulic cylinder of the waste plastic baler, we need to check the machine to ensure that the hydraulic baler can operate normally?
1. Adjust the exhaust device. First reduce the working pressure in the cylinder to about (0.5--1)MPa, and then make the piston rod reciprocate and open the exhaust plug to exhaust.
2. Adjust the buffer device. In the case of an adjustable buffer device and the piston is in motion, the throttle valve should be placed at a position with a small flow, and then the size of the throttle should be adjusted gradually until the requirements are met.
3. Inspection of various parts of the hydraulic cylinder. In addition to the above adjustments of the hydraulic cylinder, it is necessary to check the oil leakage of each seal, and whether the bolts of the connecting parts are loosened, etc., to prevent accidents.
4. Check regularly. According to the use of hydraulic cylinders, arrange the time for regular inspections and make inspection records.
The maintenance is for the better operation of the machine, and for the long-term use of the machine, please keep an inspection record.
If you need a waste plastic baler
, please visit the Nick Machinery website www.nkbaler.net, there are product pictures and videos, please click to watch! Or call 86-29-86031588, if you don’t understand, someone will be responsible for the explanation.