Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Which one is better Your current location:Home >> Which one is better
Which one is better for the vertical baler oil cylinder, which is single cylinder or double cylinder?
Author : admin Time : 2021-09-01 AllPageView : 205
Which one is better for the vertical baler oil cylinder, which is single cylinder or double cylinder? The cylinder of the vertical baler adopts a fixed cylinder. When it is necessary to continuously rotate with the working mechanism, a rotary oil cylinder should be selected. When the piston rod is required to move in an arc in addition to linear motion, shaft pin cylinders are used. It is related to the use occasion and the stroke of the mechanism, but generally the full stroke is not selected to prevent the piston and the cylinder head from colliding. If it is used for clamping mechanism, etc., a margin of 10-20 mm should be added according to the calculated stroke. Determine the thrust and pulling force output by the cylinder according to the size of the load force. Generally, the force of the cylinder is required for the theoretical balance of the external load, and different load rates are selected according to different speeds, so that the output force of the cylinder has a little margin. When designing the fixture, the force expansion mechanism should be used as much as possible to reduce the overall size of the cylinder.
So what are the main differences between the dual hydraulic cylinder vertical waste paper baler equipment and the single cylinder under the same thrust? In fact, the two production principles are basically the same except for the number of cylinders. When the thrust requirement is large, the strength of the equipment itself needs to be increased so that the equipment can withstand sufficient pressure. The advantages of the double-cylinder vertical baler are as follows:
1. It can be that the compressed material receives a balanced force, the force on both sides is even, and the Baling Press effect is better under the same conditions. This effect is very obvious when Baling Press harder materials such as plastic bottles.
2. Because of the uniform force, various types of raw materials can be packaged. Such as straw, cotton, quilt, etc. Increasing the maximum thrust of each cylinder can make the entire equipment have greater thrust. Common single-cylinder vertical balers generally have three thrusts of 150KN, 300KN, and 450KN, while the maximum thrust of double-cylinder vertical waste paper balers are 600KN, 800KN, and 1000KN. Other special requirements can be designed for greater thrust.

3. The double-cylinder vertical waste paper baler has advantages and disadvantages. The principle of using mechanical equipment is that the simpler the better, the more complex the equipment, the easier it is to malfunction. So what are the main faults that occur in double cylinders? For the double-cylinder structure baler, the most common daily failure is that when the compressed raw materials are obviously unbalanced on both sides, it is easy to cause the reaction forces of the two cylinders to be different, resulting in cylinder jams and causing damage to the cylinder piston rod. damage. Attention should be paid in production operations. Pay attention to daily operation methods.

After the above points of explanation, when you choose a vertical waste paper baler, you can have a considerable choice. When choosing a machine, try to investigate and understand as much as possible, check the quality of the equipment more, and choose the most suitable mechanical equipment of your own.www.nkbaler.com
Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD