Shaanxi Nick Machinery
Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Company News Your current location:Home >> Company News
  • Peanut shells are a common surplus material in grain processing plants. Because peanut shells are relatively light, they occupy a larger area and are inconvenient to transport. Therefore, people need to use Baler machinery to compress and pack peanut shells, which saves storage space. It also facilitates transportation.

    Peanut shells are a common surplus material in rice mills. Because peanut shells are relatively light, they occupy a relatively large area. In addition, it is inconvenient to transport. Therefore, people need to use Baler machinery to compress and pack the peanut shells, which saves storage space. It facilitates transportation.

    NKBALER has a group of R&D teams with strong technical force and experienced after-sales service team, committed to escorting your normal production. www.nkbaler.com
  • With the rapid development of the plastics industry, the application of plastic products has penetrated into every corner of society, from industrial production to food, clothing, housing and transportation, plastic products are everywhere. People are beginning to discover that plastic waste has quietly poured into us, seriously affecting our health and living environment. How to resolve the pollution problems caused by waste plastic and garbage plastic is imminent.
    (1) Waste plastics bring undesirable stimulation to people's vision, affect the overall beauty of cities and scenic spots, destroy the city appearance and landscape, and cause "visual pollution".
    Moreover, according to statistics, global plastic consumption is increasing at an annual rate of 8%, and the annual consumption of plastics in 2030 will reach more than 700 million tons.
    (2) Potential hazards. After the waste plastic packaging enters the environment, it is difficult to degrade, causing long-term and deep-seated ecological and environmental problems.
    Waste plastic packaging mixed in the soil affects the absorption of nutrients and water by crops, which will reduce crop yield; waste plastic packaging discarded on land or in water bodies is swallowed as food by animals, causing animal deaths (in zoos, pastoral areas and oceans) This kind of situation is not uncommon); waste plastic packaging mixed in domestic garbage is difficult to deal with: landfill treatment will occupy land for a long time, and domestic garbage mixed with plastic is not suitable for composting, and the sorted waste plastics are also It is difficult to recycle because the quality cannot be guaranteed.
    In recent years, there have been reports of more and more discarded plastics in the ocean. On April 3, some media once again reported the news that waste plastic appeared in the bodies of marine animals. It is understood that 22 kilograms of waste plastic was found in the belly of a pregnant sperm whale on the coast of Sardinia, Italy. According to a related report from the "World Bank", the global waste volume will increase by 70% in 2050 without emergency measures.
    Compared with waste plastics, which appear at the rate of tons per day, the recovery and recycling effects of plastics are relatively lagging behind. According to statistics from the China Youth Daily at the end of 2018, only 10% of the disposable plastic products produced worldwide can be recycled, 12% are incinerated, and more than 70% of the plastics are directly discarded into the soil and air. And in the ocean.

    Due to the difficulty of recycling disposable plastic products, or the low recycling value, it has caused tremendous pressure on the environment.

    Even so, waste plastic still contains huge renewable resources. Although plastic waste is harmful, it is not "heinous". Its destructive power is often tied to low recycling rate. Plastics can be recycled and reused as raw materials for making plastics, materials for heat generation and power generation, and turning waste into treasure. This is the most ideal disposal method for waste plastics. Therefore, recycling of waste plastics is an important measure to solve ecological environmental pollution.
    The recycling and recycling of plastics is conducive to sustainable development, and it is urgent. Nick Machinery recognizes this point. The waste plastic baler produced is simple in structure and easy to operate. It greatly solves the recycling and storage problem of waste plastic baler, and is convenient for transportation and The transportation cost is reduced, the recycling of waste plastic baler is promoted, and the harm caused by waste plastic is alleviated.
  • Nick Machinery adheres to the design concept of one-pack push, which solves the following major operational problems:
    1. Continuous feeding to ensure that the hopper is full.
    2. The finished bale cannot be obtained, and in the case of insufficient materials, a complete bale will not be produced.
    3. The problem of different sizes and different weights of each bag.
    4. Too much feed and the feeding cylinder cannot reach the cylinder stroke.
    5. The pressure plate of the feeding and bagging cylinder is not manufactured precisely, which leads to the problem of material leakage and blockage of the compression chamber.

    6. The equipment is equipped with a hydraulic oil cooler.

    Nick Machinery Straw Baler is mainly suitable for the packaging of loose materials, such as waste paper edges, cartons, straw, wheat straw, straw, beverage bottles, etc.www.nkbaler.com

  • 1. Hydraulic configuration: The hydraulic circuit system with fast and low noise of regenerated oil adopts the combination of imported and domestic high-quality components, which not only guarantees the quality but also reduces the cost;
    2. Electrical configuration: PLC control is selected to make the circuit simple, the failure rate is low, and the inspection and troubleshooting are simple and fast;
    3. Wire binding device: the latest international wire binding device, saving iron wire, fast binding, low failure rate, easy to clean, maintain and repair;
    4. Conveyor: Conveyor belt adopts new PVC material, which is anti-corrosion and aging resistance, has the advantages of slip resistance, large conveying capacity and strong load capacity;

    5. Easy installation, simple foundation construction, no need for foundation reinforcement.

    Nick Machinery's waste plastic baler keeps up with the market dynamics and makes timely improvements, so as to better serve the new and old users and provide help for the development of the society. www.nkbaler.com
  • The transmission form of domestic shears is still mainly gear transmission. For the transmission system of large-scale heavy shears, it is explored to adopt a jaw crusher structure. 
    One end of the knife frame is hinged and fixed, and the other end is connected with the crank connecting rod mechanism for swinging, which has high work efficiency;
    With the advancement of science and technology in our country in recent years, the variety of shears is complicated, and more and more shears have appeared in people's field of vision and are being used;
    Among them, the CNC shearing machine has been praised by consumers for its good functions and higher production power. 
    With the development of high technology, the CNC program of the shearing machine is getting higher and higher.
     In the next few years, the products of the shearing machine will be There is more room for development, and its demand will show a trend of gradual increase.
    Due to the use of a new electro-hydraulic control system and an enhanced oil cylinder, the working efficiency of this series of shears can reach 6-15 times/min according to the model. The application of this machine solves the problem of crushing and recycling of large-scale heavy waste charge. It is widely used in rolling mills, metallurgical plants, and scrap steel processing and recycling units. It is an effective equipment for metallurgical charge processing and profile cutting;
    The designer of the shearing machine originated from Europe. It has a compact structure and an integrated design for easy movement. It can be controlled by a hybrid of an engine and a motor, or can be controlled separately by an engine or a motor. It is a new type of shear that can handle large scrap metal equipment.

    The gantry shearing machine has a complete range of models and is available for test machines.

     If you have any needs in this area, you can directly contact online customer service: 86-29-86031588. Welcome customers from all over the world to call us!
  • The horizontal baler has a wide range of applications. It can be used as a machine and equipment for packaging waste paper, but also as a production equipment for packaging and tamping similar products. Its greater characteristics depend on the practical operation. It is very simple , Even if you are not trained in technology, you can get started quickly.

    Its distinctive horizontal baler device is fast, and the specifications of the reduction chamber and lumps can also be customized according to their own requirements, and the installation is also very convenient. It further improves everyone's labor productivity, reduces labor efficiency, and saves Human resources, good machinery and equipment to reduce transportation costs, and the failure rate of equipment in the entire process of actual operation is also very low, even if you encounter problems, you can easily handle it.


    Nick Machinery continues to improve the scope of use of the machine, allowing customers to greatly improve labor productivity during use. www.nkbaler.com
  • «
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • ...
  • 111
  • 112
  • »
  • Shaanxi Nick Machinery Equipment Co. LTD
    TEL:86-29-86031588
    Fax:86-29-86031588 Sitemap
    Add:East Qunsheng Road Wuxi City,Jiangsu,China
    Email:sales@nkbaler.com
    WhatsApp:008615021631102
    Copyright © 2018 NKBALER .rights reserved
    Whats App Skype Shaanxi Nick Machinery
    Equipment Co. LTD