Shaanxi Nick Machinery
Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Company News Your current location:Home >> Company News
  • Special attention should be paid to the maintenance of the waste paper baler in different seasons. The weather is warm in spring and summer, and the maintenance work of the waste paper baler is very different from the maintenance work in the severe cold weather in winter. of.
    Since many friends now use waste paper balers in winter, the next waste paper baler manufacturer Shaanxi Nick will introduce to you about the maintenance of waste paper baler equipment in winter.
    In winter, due to the sudden drop in temperature and the cold weather, it is often difficult to start the engine of the equipment. The cooling water and electrolyte are very easy to freeze, so be careful.
    At the same time, due to dry weather and other reasons, it may cause serious parts loss and fuel consumption will increase significantly. Customers must take necessary maintenance measures before the winter.

    The cooling system in the working process of the waste paper baler can not be used, in order to prevent the temperature from being reduced, the water freezes and the equipment is damaged by freezing. The water needs to be released. If the daily workload is very heavy, you can add water on the same day. Discharge the cooling water after finishing the work every day.

    If it is working indoors, it is not necessary to release the cooling water if the temperature can be guaranteed not to freeze.
    In addition, in the use of hydraulic oil, some low-quality hydraulic oils cannot function well in winter. This is the reason why our waste paper baler manufacturers have always recommended customers to choose wear-resistant high-quality hydraulic oil.
    If there is a problem with the hydraulic oil, it will affect the performance of the waste paper baler, and seriously affect the internal components of the equipment. In particular, the hydraulic oil must be changed frequently in winter.
    It is best to use a low-viscosity oil to maintain its fluidity at low temperatures. At the same time, lubricants should also be used in winter, which is very important.
    The above are some of the maintenance tips of waste paper baler manufacturer Shaanxi Nick on the use of waste paper baler in winter. I hope it can be helpful to everyone.
  • Waste paper balers have brought great convenience to people’s lives. Large-scale equipment like this requires regular maintenance and the selection of some related components, such as the use of hydraulic oil for waste paper balers. The paper baler manufacturers come to have a look.
    First, you need to observe the appearance of the oil. The appearance and color of different types of oil will be different. If the oil is lighter, it means that it is a light distillate and a highly refined oil;
    If the oil is darker in color, it means that the oil is mostly residual oil residue, is not highly refined, or is a heavy fraction.

    Secondly, you can pour the oil into a transparent glass bottle and shake it to observe its thickness. At the same time, look at the phenomenon of the oil film hanging on the bottle and the rate of bubble generation and disappearance, so that different grades of oil can be distinguished.

    Oil with low viscosity produces a lot of bubbles, rises quickly and disappears quickly, and has less oil film; oil with high viscosity, produces less bubbles, rises slowly and disappears slowly, and has a lot of oil film. .
    That is, the smell of each oil is different, such as gasoline, kerosene, diesel, alcohol, and so on. If the oil smells a bit sour, it means that it contains additives; if the oil smells of alcohol, then alcohol must be added.
    The choice of hydraulic oil for the waste paper baler directly affects the convenience, control performance and low failure rate of the waste paper baler control system. It also determines the operating efficiency of the waste paper baler, the failure rate and service life of the cylinder.
    So in order to ensure the production of waste paper baler, we must use high-quality and authentic waste paper baler hydraulic oil.
  • 1. Precautions during the installation of the hydraulic oil pump of the industrial waste paper baler

    With the increasingly severe domestic natural environment and the stricter requirements for ecological and environmental protection, papermaking raw materials are becoming increasingly scarce. China's waste paper recycling and reuse industry shows a good industry development trend. The environmental protection and energy saving industry will finally usher in a bright future.
    Today, the waste paper baler manufacturer will share the precautions during the installation of the hydraulic oil pump of the industrial waste paper baler for everyone. I hope it can help you.
    1. The pros and cons of the installation and use of the hydraulic oil pump have a very important impact on the stable operation and service life of the pump. Therefore, the installation, calibration and operation must be carried out carefully and not rashly.

    The support frame or base of the hydraulic oil pump must be strong and stable, and the pump shaft of the hydraulic oil pump must be well aligned with the motor.

    2. The installation relative height, length and pipe diameter of the suction pipe of the hydraulic oil pump should meet the calculated value, strive to be short and reduce unnecessary losses; and ensure that the pump does not exceed its allowable cavitation allowance during operation.
    The inner diameter of the suction pipe should not be lower than the specified requirements. The suction pipe should not be too long. The 90-degree bend should not exceed two. If it is connected to the inlet of the hydraulic pump with a soft short connection, the hydraulic pump should be installed at a relative height so that the hydraulic oil can flow by itself. The suction port of the oil pump is suitable.
    3. The suction and discharge pipes of the hydraulic oil pump should have support frames, which are not allowed to bear the load of the pipes.
    4. The place where the hydraulic oil pump is installed should be spacious enough to facilitate maintenance and operation.
    The above are the precautions in the installation process of the hydraulic oil pump of the waste paper baler. For the future, the waste paper recycling industry will surely become a sword in the paper industry. Manufacturing new paper from waste paper has become a global demand.
    Facing the world’s second largest consumer of paper and paper products and the largest net importer of international paper trade, China’s paper consumption is still growing, and the waste paper recycling industry is critical to China’s sustainable development and environmental protection.
    Will make a huge contribution. Therefore, the waste paper recycling industry is bound to become a key national support project in the near future. The development prospects of China's waste paper recycling industry are broad. The future of the waste paper baler industry is also very bright.

  • How to use the waste paper baler to be more standardized?
    1. Before use, you need to make necessary adjustments, including: the adjustment of the rope winding mechanism, the height of the picker, the gap between the picker and the feeding roller, the tightness of the bale, etc., and check whether the operation of each part is normal. If there is any abnormality, it should be shut down for maintenance;
    2. When the hydraulic pipe of the waste paper baler is connected to the tractor hydraulic output, it is forbidden to plug and unplug the oil pipe when the hydraulic oil pipe is under pressure;
    3. In the process of use, how to strictly prohibit the picker's elastic teeth to rake the waste paper baler;
    4. In case of blockage during operation, turn off the engine and cut off the power before clearing it;

    5. In repair and maintenance, the use is more standardized? The power output of the engine must be cut off. Waste paper baler manufacturers

  • Installation of hydraulic oil pipeline of waste paper baler:
    1. When designing and piping, you should first consider the components, hydraulic components, pipe joints and flanges to be connected according to the hydraulic schematic diagram.
    2. The laying arrangement and direction of pipelines should be neat and consistent, and the levels should be clear. Try to use horizontal or vertical pipes. The non-parallelism of horizontal pipelines should be ≤2/1000; the non-verticality of vertical pipelines should be ≤2/400, and the level should be tested. .
    3. Between parallel or intersecting piping systems, there should be a gap of more than 10mm.

    4. The pipeline configuration must make the pipeline, hydraulic valve and other components easy to load, unload, and maintain. Any section of the pipeline or component in the system should be freely disassembled and assembled without affecting other components.

    5. When piping, the pipe must have certain rigidity and anti-vibration ability.
    6. The weight of the pipeline should not be borne by valves, pumps and other hydraulic components and accessories; nor should the pipeline support the weight of heavier components.

    7. For longer pipelines, effective measures must be considered to prevent the stress caused by the expansion and contraction of the pipe due to temperature changes.

    Shaanxi Nick Mechanical Equipment Factory specializes in the production of waste plastic balers. The advantages of waste plastic balers can be manifested in many ways. Products that can inspire customer interest can be better accepted.

  • What performance is required for the oil of the waste paper baler?
    1. It has good lubrication performance. The working fluid in the hydraulic system of the waste paper baler is not only used to transfer energy, but also to lubricate the friction surfaces of the hydraulic components.
    In some machine tools, the oil source of the machine tool lubrication system comes from the hydraulic system, and the hydraulic system uses the same oil pump for oil supply. Therefore, hydraulic oil should have high oil film strength and good lubrication performance within the range of working temperature and pressure changes to avoid dry friction.
    2. The quality should be pure and free of impurities. If it contains moisture, it will reduce the lubrication performance of the waste paper baler oil; containing mechanical impurities will block the throttle orifice and jam the valve core; acid and alkali will corrode the metal and damage the sealing structure;

    If there are volatile substances, the oil will thicken and generate bubbles, which will damage the stability of the transmission.

    3. The oil should not be easily oxidized to prevent the production of gums and asphaltenes due to oxidation and the deterioration of the oil. The impurities formed by oxides can also block the oil circuit and destroy the normal operation of the waste paper baler system. 
    4. Where fire prevention is required, the burning point of oil should be high; in cold climates, the freezing point of oil should be low. 

    5. Non-toxic, no impact on human health.

    Shaanxi Nick Mechanical Equipment Factory specializes in the production of waste plastic balers. The advantages of waste plastic balers can be manifested in many ways. Products that can inspire customer interest can be better accepted.

  • «
  • 1
  • 2
  • ...
  • 10
  • 11
  • 12
  • 13
  • 14
  • ...
  • 95
  • 96
  • »
  • Shaanxi Nick Machinery Equipment Co. LTD
    TEL:86-29-86031588
    Fax:86-29-86031588 Sitemap
    Add:East Qunsheng Road Wuxi City,Jiangsu,China
    Email:sales@nkbaler.com
    WhatsApp:008615021631102
    Copyright © 2018 NKBALER .rights reserved
    Whats App Skype Shaanxi Nick Machinery
    Equipment Co. LTD