Automatic waste paper baler equipment 2021-02-14

Maintenance method of automatic waste paper baler equipment
1. Loosen and tension the waste paper baler: lift the chuck to clamp the plastic guide belt, the belt conveyor reverses to loosen the belt, send the excess plastic belt back to the storage box, and tighten the strapping. Then, the strapping hand of the strapping machine clamps the plastic strap, and then further tightens the package to the adjusted tightness.
Maintenance method of automatic waste paper baler equipment
2. Cutting and bonding of the automatic strapping machine: pull the guide plate out from the middle of the two layers of plastic tape, insert the electric perm head between the two layers of tape at the same time, and then lift the two chucks to clamp the other tape. One end, and then the cutter cuts the tape. As we all know, the price of hydraulic baler is very expensive. Be careful when using it. How to diagnose, push the wire to the head of the hair iron to contact it, heat the wire to melt (surface), then the hair iron is quickly withdrawn, and the knife continues to rise. The two layers of plastic tape melted on the surface are pressed on the pressure plate, then cooled and solidified. The two-belt bonding machine has no ironing head and starts to rub to complete bonding.

3. Unpack the waste paper baler equipment: the pressure plate exits the bound plastic belt loop, and reset the chuck to complete the packaging of the waste paper baler.

4. Paper feeding belt of waste paper packaging machine: The belt feeding wheel rotates forward to convey the plastic belt from the storage box to the track, ready for the next packaging.
Nick Machinery’s waste paper baler, straw baler, automatic baler, horizontal waste paper baler, hydraulic waste paper baler, and vertical waste paper baler are of good quality and low price. Our company has a professional after-sales service team to provide you with free installation and debugging equipment guidance. We welcome you to come to my Nick factory to inspect the baler equipment. For more attention: www.nkbaler.com. Or email: sales@nkbaler.com

For Details

Commercial cardboard compactors 2021-02-14

In what occasions can the basic characteristics of industrial waste paper baler be used
After the hydraulic oil pump device of the industrial waste paper baler is tested as follows, check the temperature and vibration of the bearing during the test operation: loosen the coupling and place it on the pump shaft and base of the electric oil pump on a horizontal surface. And adjust the wedge to calibrate the equipment level, and tighten the anchor bolts correctly to avoid loosening. In order to prevent impurities in the pipeline from entering the pump, a filter should be installed in the pump glue of the pipeline of the new equipment, and its effective cross-sectional area should be 2 to 3 times the cross-sectional area of the suction pipe.
In what occasions can the basic characteristics of industrial waste paper baler be used

There are many types of packaging tapes on the market, and the quality is also uneven. So, what are the characteristics of industrial waste packaging machines? What occasions can it be used? This can be a bit difficult compared to users who have never used packing tape. The relevant characteristics of the packaging material of the garbage baler.

1. Low elongation: The elongation is one-sixth of polypropylene (PP) tape, which can maintain tension for a long time.
2. Beautiful and not rusty: the steel belt will not rust, and does not pollute the binding, and you can learn bright colors.
3. Strong heat resistance: the melting point is 260 degrees, and it will not deform when used below 120 degrees.
4. Strong tensile strength: not only the tensile strength of the steel strip, but also the ductility of impact resistance can ensure the safety of your product transportation.
5. Good economic benefits: The length of 1 ton of plastic steel belt is equivalent to 6 tons of steel belt. The unit price per meter is lower than the steel belt, which can save your cost.
6. Good flexibility: There is no sharp edge of the steel belt for safe operation, and it will not hurt your hands or damage the bundled items.
Shaanxi Nick Machinery Equipment Co., Ltd. has been committed to the research, development and manufacturing of waste paper balers, closed-door hydraulic balers, plastic bottle balers, straw balers, and metal briquetting machines for many years, and has perfect after-sales service. We are willing to seek common development and create the future together with colleagues from all walks of life! Warmly welcome new and old friends at home and abroad to call, write, and visit our factory. For more attention: www.nkbaler.com. Or email: sales@nkbaler.com

For Details

Industrial waste paper baler 2021-02-14

Precautions during installation of hydraulic oil pump of industrial waste paper baler
1. The quality of the oil pump device has a very important influence on the smooth operation and service life of the pump. The support or base of the hydraulic pump of the industrial waste paper baler must be firm, and the pump shaft of the hydraulic pump must be aligned with the motor.
2. The device position, length and diameter of the suction pipe of the oil pump should reach the calculated value, and strive to be simple; and make the pump not larger than the cavitation margin during operation. The inner diameter of the suction pipe shall not be less than the specified requirements. The suction pipe should not be too long. No more than two 90 degree bends. It should be connected to the oil pump through a soft short connection.
Precautions during installation of hydraulic oil pump of industrial waste paper baler

3. The suction and discharge pipeline of the oil pump should have a bracket.

4. The address of the oil pump should be spacious to facilitate maintenance work.
With the increasingly severe domestic environmental situation and stricter environmental protection requirements, papermaking raw materials are becoming increasingly scarce. China's waste paper recycling and reuse industry shows a good development trend. The energy conservation and environmental protection industry is bound to usher in a bright future.

For the future, the waste paper recycling industry will surely become a sword in the paper industry. Manufacturing new paper from waste paper has become a global demand. Facing the world’s second largest consumer of paper and paper products and the largest net importer of international paper trade, China’s paper consumption is still growing, and the waste paper recycling industry is critical to China’s sustainable development and environmental protection. Will make a huge contribution. Therefore, the waste paper recycling industry is bound to become a key national support project in the near future. The development prospects of China's waste paper recycling industry are broad. The future of the waste paper baler industry is also very bright.

Shaanxi Nick Machinery Equipment Co., Ltd. has been committed to the research, development and manufacturing of waste paper balers, closed-door hydraulic balers, plastic bottle balers, straw balers, and metal briquetting machines for many years, and has perfect after-sales service. We are willing to seek common development and create the future together with colleagues from all walks of life! Warmly welcome new and old friends at home and abroad to call, write, and visit our factory. For more attention: www.nkbaler.com. Or email: sales@nkbaler.com

For Details

Horizontal Balers, Industrial Baler Machines 2021-02-14

Production line failures and solutions in daily production of household garbage baler
1. Wire failure
1. The circuit of the household garbage baler is unplugged, the electromagnet is not energized, and the control line is used to energize the electromagnet instead.
2. The electrode welding is not good, and the joint is loose and re-welded, and then welded again.
3. The voltage is too low or unstable. Check the voltage across the solenoid. The change value should be within 10 of the rated voltage.
Production line failures and solutions in daily production of household garbage baler
2. The electromagnetic coil is heated and burned
1. The coil insulation is poor and leakage occurs, so the coil needs to be replaced.
2. If the solenoid core fails, it cannot be sucked. The solenoid core must be replaced.

3. The push rod is too long to accurately suck the solenoid valve core. You need to trim the putter to the proper position.

4. The electromagnet works at high frequency, which will cause the iron core to dry and cause heating and expansion, which will cause the iron core to jam and repair. The core needs to be replaced.
Waste paper baler has many characteristics. First of all, the hydraulic carton Baler can be operated hydraulically, that is, it can be operated manually or automatically controlled by a computer. Come and fetch it. For a long time, the automatic hydraulic plastic baler has been used for the packaging of cartons, wooden boxes, paper packaging and cloth packaging in the commercial, postal, railway, banking, food, book and distribution industries. The automatic hydraulic plastic baler adopts hydraulic transmission, with reasonable structure, compact structure and stable hydraulic performance. It has the characteristics of high work efficiency, low energy consumption, easy installation and operation, safe and reliable use, strong workplace adaptability, and moderate price.
Shaanxi Nick Machinery Equipment Co., Ltd. has been committed to the research, development and manufacturing of waste paper balers, closed-door hydraulic balers, plastic bottle balers, straw balers, and metal briquetting machines for many years, and has perfect after-sales service. We are willing to seek common development and create the future together with colleagues from all walks of life! Warmly welcome new and old friends at home and abroad to call, write, and visit our factory.

For Details

OCC Fully Automatic Horizontal Baler 2021-02-14

Common sense that you must know the dangers caused by the high temperature of the waste paper baler system
The waste paper baler has many basic common sense in the practical process. Today, we will talk about the hazards caused by the high oil temperature of the system during the use of the machine, which will definitely help you.
Common sense that you must know the dangers caused by the high temperature of the waste paper baler system
The hot weather in summer raises the surrounding temperature. The temperature of the waste paper baler system is usually within the range of 60~80°C, and the limit temperature should not be greater than 100°C. Excessive system temperature will cause:
1. Waste paper packaging mechanical parts, the thermal deformation of the moving parts with different thermal expansion coefficients in the hydraulic parts will be stuck due to their smaller gaps, which will cause failures, affect the transmission accuracy of the hydraulic system, and cause the parts to work better. difference.

2. Reduce oil viscosity, increase leakage, reduce the volumetric efficiency of the pump and the efficiency of the entire system. As the viscosity of the oil decreases, the oil film of moving parts such as slide valves becomes thinner and cut, thereby increasing frictional resistance, leading to increased wear.

3. Deformation of the rubber sealing ring of the waste paper baler will accelerate the aging failure, reduce the sealing performance and service life, and cause leakage.
4. Accelerate the oxidative deterioration of the oil and precipitate the asphalt material, thereby reducing the service life of the hydraulic oil. The deposits block the orifice and the slit valve port, causing the pressure valve to become stuck and inoperable, and can rupture.
5. Reduce the air separation pressure of the oil, and the air dissolved in the oil escapes and forms air pockets, causing the hydraulic system to reduce its working performance.
Shaanxi Nick Machinery Equipment Co., Ltd. has been committed to the research, development and manufacturing of waste paper balers, closed-door hydraulic balers, plastic bottle balers, straw balers, and metal briquetting machines for many years, and has perfect after-sales service. We are willing to seek common development and create the future together with colleagues from all walks of life! Warmly welcome new and old friends at home and abroad to call, write, and visit our factory. For more attention: www.nkbaler.com. Or email: sales@nkbaler.com

For Details

Precautions in the use of waste paper hydraulic baler 2021-02-14

The movement direction of the hydraulic cylinder of the waste paper baler is controlled by the reversing valve. The pressure oil output from the hydraulic pump of the waste paper baler enters the lower cavity of the hydraulic cylinder along the pipeline through the ring groove on the left side of the throttle valve and the reversing valve valve. Under the action of the pressure oil of the waste paper baler, the piston moves upward and the pushing mechanism realizes the lifting action. At this time, the oil discharged from the upper cavity of the hydraulic cylinder flows back to the oil tank through the ring groove and pipeline on the right side of the valve core of the reversing valve.

Precautions in the use of waste paper hydraulic baler

The movement speed of the hydraulic cylinder is controlled by a throttle valve. The pressure oil output by the hydraulic pump of the waste paper baler flows through the one-way valve and is divided into two paths, one path leads to the hydraulic cylinder through the throttle valve, and the other path flows back to the oil tank through the overflow valve. The throttle valve is like a faucet. By turning the valve core and changing the size of its opening, the flow of oil entering the hydraulic cylinder through the throttle valve can be changed to control the lifting speed. The output of the hydraulic cylinder is controlled by the relief valve. Adjusting the pressing force of the spring in the overflow valve can control the high pressure of the hydraulic pump output of the waste paper baler. The high pressure determines the carrying capacity of the waste paper baler. When the lifted external load exceeds the carrying capacity set by the overflow valve, the oil pressure reaches the high pressure of the hydraulic pump. At this time, the hydraulic force acting on the steel ball pushes the steel ball open, and the pressure of the waste paper baler The oil flows directly back to the tank through the overflow valve and the oil return pipe, and the oil pressure will not continue to rise. Therefore, the overflow valve here at the same time plays the role of overload safety protection for the system.

The oil sucked by the hydraulic pump of the waste paper baler from the oil tank is first filtered by the oil filter to remove impurities and dirt to protect the valves in the system from being blocked.
Precautions in the use of waste paper hydraulic baler
1. The oil supply system should be based on the quantity specified in the foregoing description plus the specified brand of working oil. The oil temperature should not exceed 50-70°.
2. In the oil supply system
A. The crude oil must be cleaned once a month within half a month of the new installation and must be filtered by a 120-150 mesh filter before being added to the tank.
B. After three months, pump out all hydraulic oil and clean the oil tank thoroughly.
C. After three months of normal use, clean the oil and filter once every production quarter.
3. Effective measures should be taken after adjustment of the overflow valve, unloading valve, travel switch, etc. to prevent others from moving indiscriminately to avoid accidents.
4. The equipment must be carefully overhauled and maintained once a year, during which all greases in the bearings should be replaced.
5. Non-operators are strictly forbidden to operate. When feeding, you must remove your hands and then press and compress. Operators must pay attention to safety.

6. It is strictly forbidden to overload the package.

7. After filling, be sure to step on the material exposed from the material box to the upper part of the material box, otherwise it may cause the cylinder to bend or the pressure plate to deform

For Details