Shaanxi Nick Machinery
Equipment Co. LTD
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Company News Your current location:Home >> Company News
  • The Nick brand small waste paper baler is simple to operate and automatically discharges the bale, which improves work efficiency. The installation of emergency stop settings makes the operation safer.
    The waste paper hydraulic baler is specially used for the recycling and compression of waste paper, cardboard, corrugated boxes, newspapers and other materials. Do you know the conditions that determine its efficient production?

    1. The most direct influencing factor of the production efficiency of the small waste paper baler: the model and specifications of the baler, the output varies from model to model, and the difference in specifications directly determines the production efficiency of the baler.

    2. The efficient production of small waste paper baler is also inseparable from the cylinder performance of the baler. The performance of the cylinder determines the stability of the baler. To ensure the efficient production performance of the baler, you must choose a baler manufacturer with exquisite cylinder production technology.
    3. The quality of the hydraulic oil selected for the small waste paper baler. The quality of the hydraulic oil directly determines whether the cylinder can exert the maximum effect, and also directly affects the failure rate and service life of the cylinder. To ensure the efficient production of the baler, high-quality and genuine No. 46 anti-wear hydraulic oil must be used.

    4. The convenience, control performance and low failure rate of the control system of the small waste paper baler also determine the efficiency of the baling operation.

    Shaanxi Nick Machinery Equipment Co., Ltd. is committed to the production of waste paper balers. The small waste paper balers and automatic waste paper balers produced are of high quality and low price. If you need it, please log on to our website: www.nkbaler. com, or call: 86-29-86031588, welcome to call for more details!
  • Nick Baler high-end technology makes the straw vertical waste paper box hydraulic baler more adapt to the development of the times and provide you with better services.

    Installation has now become a major consideration for customers when purchasing machinery and equipment, so for vertical waste paper box hydraulic balers, does it need to be installed? In fact, there is no need at all, the following is a careful analysis of its basis.

    Many of my friends may have seen and used small Baler products. First, its structure is relatively simple, mainly composed of motors, gear pumps, hydraulic cylinders, control valves, etc. After assembly, they will form a whole, just like a website Like the picture above, there is no accessory equipment, and only a host is needed to complete the production.

    Second, the operation of the waste paper baler is also very simple. After you go back, you only need to connect the three-phase power supply and fill the oil tank with hydraulic oil. At that time, Nick Machinery will also give away a free manual. The structure of the baler is described in detail above. Features and some common small problem handling methods have solved the worries.

    From the above two aspects, the small waste paper box baler is simple in structure, easy to operate, and does not need to be installed. Both the quality and after-sales friends can rest assured.

    With the continuous increase in customer demand for machinery and equipment, Nick Machinery's vertical waste paper box hydraulic baler is also continuously improved, and it produces suitable vertical waste paper box balers with different characteristics for major manufacturers. Company website:, Tel: 86-29-86031588, looking forward to your arrival.
  • The Baler work done by the lint baler can effectively pack and recycle cotton, lint, chemical fiber, etc., and it is also a support to prove the strong recovery power of the lint baler. The lint baler is mainly made according to the characteristics of the lint Pack a plan to carry out the work effectively.

    The hydraulic cylinder of the lint baler is characterized by a long stroke, a small lint baler, and the size becomes smaller after being retracted. The automatic lint baler is suitable for the limited space for placing the hydraulic cylinder and the stroke requirements are relatively high. For long occasions, it is often used in construction machinery and transportation machinery.

    For our development, the lint baler must have excellent technology and high-quality performance. Excellent quality is the foundation of its existence, and high-quality performance is the opening brick of the market.
    A good quality advantage is the foundation for the Nick Machinery brand to win at the starting point, and a good service is the next step in corporate marketing.
    The quality of service determines the loyalty of users to the brand, and determines the degree of brand development of an enterprise. Nick Machinery has been working hard to do its best. Company website:, Tel: 86-29-86031588, looking forward to your arrival.
  • In daily life, customers are always prone to problems when using horizontal hydraulic balers. Today Nick Machinery summarizes the common problems of hydraulic balers for your reference.
    1. If the oil supply is interrupted, it is likely to cause an accident. The system software should add the required type of oil to the total required in the above situation. The application oil temperature must not exceed 50-70°C.
    2. The new installation of the waste paper baler has just started to clean up once a month, which lasted more than half a year. The gear oil must be filtered according to the 120-150 mesh filter device, and then added to the car fuel tank.
    3. After three months, all gear oil should be pumped out and the car fuel tank should be completely cleaned.
    4. After three months of normal application, the oil filter should be cleaned every quarter of the manufacturing.

    5. After adjusting the overflow valve, unloading valve, limit switch, etc., measures should be taken to prevent others from running around to prevent safety accidents.

    6. Non-actual operation personnel are prohibited from actual operation
    7. Every year, the machinery and equipment must be carefully repaired, and all the lubricating grease in the rolling bearing should be replaced during the maintenance.
    Nick Machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other packaging equipment, company website:, telephone: 86-29-86031588, looking forward to long-term cooperation with you!
  • The hydraulic system of the horizontal hydraulic baler shows the driving force components of the hydraulic oil with a certain total flow and working pressure. This is an indispensable key component of every hydraulic system. The hydraulic oil pump is effectively selected to reduce the energy consumption of the hydraulic system.

    Increasing the rate of system software, reducing noise, improving performance at work and ensuring credibility at work are all critical.

    The standard for selecting the components of the horizontal hydraulic baler is: according to the load of the waste paper baler server, the output power size and the performance requirements of the system during work
    Clarify the type of hydraulic oil pump, and then clarify its model specifications according to the working pressure and total flow size specified by the system software.
    Shaanxi Nick Machinery Equipment Co., Ltd. is committed to the production of waste paper balers. The semi-automatic waste paper balers and fully automatic waste paper balers are of high quality and low price.
    If you need it, please log on to our company's website:, or call: 86-29-86031588, please call us for details!
  • While developing the performance of the corn stalk balers, Nick Machinery has also reduced its price, allowing customers to truly realize the convenience and benefits brought by the straw balers when using them.
    The corn stalk baler is mainly suitable for the compression of pepper, corncob sawdust, wood chips, bamboo chips, rice husks, cotton seed husks, peanut husks, leaves, branches and crushed wheat straw, rice straw, cotton stalks and other scraps, and directly bagged after compression , Convenient storage, reduce transportation costs.

    The bales after being packed by the straw baler are convenient for loading, unloading and transportation, which can make full use of the carrying capacity of the transportation means and save labor and transportation costs. So, what are its benefits in rural areas?

    1. Prevent farmers from environmental pollution caused by straw burning;
    2. A new resource has been developed to increase farmers' income. The hay bales are easy to sell and have a large sales volume;
    3. Reasonable use of resources, the bundled wheat straw can be used well, such as processing livestock and poultry feed, manufacturing fiber board, producing biogas and papermaking;
    It has promoted the development of related industries and provided a large amount of raw materials for related industries, which can save resources, optimize resource allocation, and achieve civilized agricultural production.
    In this situation, as an environmentally friendly equipment manufacturer, Nick Machinery actively cooperates with national policies, observes the market situation of straw recycling, and does a good job in the promotion of straw recycling, and produces straw balers and automatic straw compression balers for straw recycling. make a contribution.
    Company website:, phone: 86-29-86031588

Shaanxi Nick Machinery Equipment Co. LTD
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD