Shaanxi Nick Machinery
Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Company News Your current location:Home >> Company News
  • The understanding of the horizontal waste paper baler products must be in place, because understanding the products is very important to our usual work. Recently, the development of horizontal waste paper baler products in many aspects is very extensive.
    Looking at the development of horizontal waste paper balers in recent years, we can clearly see:
    More and more products are using horizontal waste paper balers, which has the advantage of being able to escort our products very well. No one likes the disorder of goods. Such products are not well displayed, and of course there are It is the transportation of goods.
    The development of horizontal waste paper balers can be seen in recent years, the demand for horizontal waste paper balers has been significantly enhanced, and in the food, daily chemical, chemical, logistics and other industries have a good display, such horizontal The waste paper baler can show itself well, and let the goods have a good presentation, then the purpose of the horizontal waste paper baler is achieved, and the successful display of the goods gives us a good visual feast for the goods. Of course, the horizontal waste paper baler is indispensable, so we are all comparing the heavy balers.

    Of course, in life we rely on the quality of the goods themselves, but without good packaging, the goods will not be well displayed in front of customers, so such goods will not have good development prospects, horizontal waste paper balers Products occupy a certain position in the industry. In the market competition, we must study the market conditions and strive to sell the horizontal waste paper baler products very easily.


    Waste paper baler, waste paper baler which is good, hydraulic baler, automatic waste paper baler, plastic bottle baler, carton horizontal baler manufacturer, please contact 15021631102, welcome to consult
  • Our hydraulic balers have been widely used in the market, but in the course of use, some friends have reflected the problem of the noise of the hydraulic baler. Should the noise problem should not exist?
        Today our hydraulic baler factory analyzes for everyone, our hydraulic baler adopts hydraulic drive, it is stable and reliable during work, and the safety is guaranteed, but there is user response. During the use of metal baler, noise will be emitted, but sometimes This noise is not there. What is the phenomenon? For this problem, our company made a summary. If oil trap occurs in the oil pump, the gear oil pump tooth shape error is large, the blade or the plunger is stuck, etc., causing noise, the valve core and the valve body are not well matched, or the surface is pulled, the oil impurities block the valve hole, and the valve is in the valve. Fatigue or damage to the spring and inflexibility of the spool movement can cause noise.
       The above problem is a simple introduction. If there is a problem with the noise of the hydraulic baler, it is necessary to find the cause and deal with it as soon as possible to avoid delay in production and increase the cost of use. Our users should learn more about related aspects in daily use. Knowledge, some minor problems occur in time to solve, so as not to bring more trouble.
     Waste paper baler, hydraulic baler manufacturer, waste paper baler price, straw baler, wood chip baler, for more inquiries, please contact us www.nkbaler.com .whatsAPP:0086-15021631102

  • 1. The shape of the pressed garbage is different. The garbage compressor can be pressed into any shape, such as: block, strip, etc., and the block produced by the garbage baler is square.
    2. Different pressure methods. The garbage compressor can be mechanical pressure or hydraulic pressure, and the garbage baler is hydraulic pressure.
    3, the pressure is different. The pressure of the garbage compressor is generally between 15 and 120 tons, and the pressure of the garbage baler is between 12 and 220 tons.
    4, the shape and volume are different. The garbage compressor has a small footprint and a small footprint. The garbage baler is divided into vertical and horizontal. The horizontal baler is large in size and covers a wide area.

    5. The scope of application is different. The garbage compressor is suitable for small businesses, and the garbage baler is suitable for business and personal use.

    Waste paper baler, hydraulic baler manufacturer, waste paper baler price, straw baler, wood chip baler, for more inquiries, please contact us www.nkbaler.com .whatsAPP:0086-15021631102

  • Items in the process of installing the industrial waste baler hydraulic oil pump:
    1. The quality of the oil pump device has a very important impact on the smooth operation and service life of the pump. Therefore, the device proofreading operation is carried out carefully and should not be carried out rashly. The bracket or base of the hydraulic pump of the industrial garbage baler should be strong and strong, and the pump shaft of the hydraulic pump should be aligned with the motor.
    2. The position, length and pipe diameter of the suction pipe of the oil pump should reach the accounting value, and strive to be simple; and let the pump not exceed the NPSH during operation. The inner diameter of the suction pipe shall not be less than the rule requirements. The suction pipe shall not be too long. The bending of 90 degrees shall not be more than two. It is connected with the oil pump and is soft and short. The position of the pump is self-flowing to the suction port of the oil pump.
    3. The suction and discharge lines of the oil pump should have a bracket.
    4. The address of the pump should be spacious to facilitate maintenance.
    After the hydraulic oil pump device of the industrial garbage baler, the temperature and vibration condition of the bearing are checked during the test operation as follows: the coupling shaft is large, and the horizontal axis is placed on the pump shaft and the base of the electric oil pump. After adjusting the wedge pad, the proofing unit Horizontally, properly tighten the anchor bolts to avoid loosening. In order to prevent the impurities in the pipeline from entering the pump, the pipeline of the new device should be equipped with a filter, and the useful section should be 2 to 3 times larger than the section of the suction pipe.
    Waste paper baler, hydraulic baler manufacturer, waste paper baler price, straw baler, wood chip baler, for more inquiries, please contact us www.nkbaler.com .whatsAPP:0086-15021631102
  • In the use of the waste paper baler, many problems will lead to the packaging of the baler is abnormal, then we need to pay attention to when using. In the control system of the waste paper baler, above the circuit board, open the control box cover, you can see an adjustment knob obviously, and the temperature adjustment in the clockwise direction increases, and vice versa. The temperature is too high or too low, the bonding effect is not good, so do not adjust too much at a time, generally adjust between the scale line 4-5. If the power supply voltage of the baler is not normal, we should adjust to 220V. Many factory voltages are often insufficient. If you use long cable wires, the voltage drop will cause the temperature of the soup head to become lower, and even if the motor is burned out when tightened, it will not be worth the loss.
  • In the current economic development process, a large amount of waste paper, waste plastics and other wastes appear in life, but unreasonable use will cause a ring.
    The pollution of the environment and the waste of resources, then how does the waste paper waste plastic in such a real life process be treated and recycled?
    First of all, in the waste paper recycling process, many people choose different papers according to different recycling methods, such as coated paper, newspapers, and book paper.
    second, after the recycling, the waste paper is sent to the paper mill, but there are many problems in the transportation process, the transportation cost is high, and the storage is not Convenient, so many people think of the waste paper baler, then I will introduce the main performance of the waste paper baler
    1. The waste paper baler is mainly used to compress the waste paper into a certain proportion and specifications to achieve the effect of reducing the volume. The normal size is 1100×1250×1700 The weight of the bag from the baler is 1300-1500kg, and the shaanxi Nick company can get this effect.
    2. In the choice of use, the waste paper baler will also appear very expensive, laborious situation, then this and your choice of baler model, canThe consumption is related, even the manufacturer has an association. The electricity cost of a normal NKW160Q model baler is 4-5 yuan. Many customers respond.
    There is a lot of electricity bills, how can we reduce this electricity bill, then shaanxi Nick company has been at the forefront of peers, only need 2-2.5,The electricity bill of a package can save an average of 100 yuan per day. Why is there so much power saving? This is the question of technology and technology.question
    3. In the process of using, the packaging machine has a slamming crash, then this time is the reason for the damage of the mechanical components in advance.
    It is also caused by unreasonable design, but the Shaanxi Nick company machine will not have such a phenomenon, and it will not produce this.The phenomenon of noise, this is the reason for saving electricity. For more, please pay attention to www.nkbaler.com 
Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD