Shaanxi Nick Machinery
Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Company News Your current location:Home >> Company News
  • The fully automatic yellow storage baler is a cylinder, dual-purpose silage and yellow storage, and is a mobile patented product. This model has successfully developed an automatic feeding hopper, which greatly increases the production speed and saves manpower. The old and weak women and children can produce. This machine can be moved in a small area, if the power supply is not convenient, it can be equipped with a diesel engine to work. It is necessary to crush corn stalks or other overly high straws for processing after primary pulverization or kneading. It can be used to press green storage straw, pasture, dry corn stalks, rice straw, wheat straw, various straw scraps, or other bleached straws. Carrying materials, etc., are bundled and automatically bagged and packed. Dry straw is stored about 30 kilograms per yellow and about 65 kilograms per green.
    It has a wide range of applications and is now widely used in the agricultural and animal husbandry industry, which has played a huge role in the protection of the environment and resources. The straw baler can press silage straw, dried corn stalks, various straw scraps, waste plastic films, etc., for bundling, but automatically bagging and packaging. The installation is simple, the foundation construction is simple, and there is no need for foundation reinforcement.
    Features
    1. It adopts PLC control system, hydraulic drive, horizontal bagging, fast delivery speed and high output.
    2. The operation is simple and easy to use.
    3. The compression bagging can be completed at one time, which is convenient for storage and reduces transportation costs.
    4. Adding a material controller can make the machine automatically start and compress, either manual feeding or automatic feeding by conveyor, with high degree of automation and less labor.

    The automatic yellow storage baler produced by Nick Machinery is simple in structure, stable in action, low in failure rate and easy to clean and maintain. Welcome to visit www.nkbaler.com.

  • The pressure control valve is divided into overflow valve, pressure reducing valve and sequence valve according to its purpose. The overflow valve can control the hydraulic system of the plastic baler to maintain a constant state when the set pressure is reached. The relief valve used for overload protection is called a safety valve. When the system fails and the pressure rises to a limit value that may cause damage, the valve port will open and overflow to ensure the safety of the waste plastic baler system. The pressure reducing valve can control the branch circuit to obtain a stable pressure lower than the oil pressure of the main circuit. According to the different pressure functions it controls, the pressure reducing valve can be divided into fixed pressure reducing valve (output pressure is a constant value), fixed differential pressure reducing valve (the difference between input and output pressure is a fixed value) and fixed ratio pressure reducing valve (Maintain a certain ratio between input and output pressure). Sequence valve can make one actuator (such as hydraulic cylinder, hydraulic motor, etc.) act, and then make other actuators act in sequence.
    The basic requirements for the hydraulic control valve of the plastic baler are as follows:
    1. When the oil of the plastic baler passes through the hydraulic valve, the pressure loss is small.
    2. Sensitive action, reliable use, small shock and vibration during work, and long service life.
    3. Good sealing performance, less internal leakage and no external leakage.
    4. The structure is simple, compact and small in size.

    Nick Machinery is a manufacturer specializing in the production of waste plastic balers. The balers produced are simple in structure, safe and reliable, and easy to operate and maintain. They are a good helper for your production.

  • 1. Before disassembling the hydraulic cylinder of the metal baler, the hydraulic oil circuit should be depressurized. Otherwise, when the joint connected with the oil cylinder is loosened, the high-pressure oil in the oil return line will be sprayed out. When the hydraulic circuit is depressurized, it should first loosen the handwheel or the pressure regulating screw at the overflow valve, etc., to unload the pressure oil, and then cut off the power or power source, so that the hydraulic device stops operating.
    2. When disassembling, it should be prevented from damaging the top thread of the piston rod, the thread of the oil port, the surface of the piston rod, and the inner wall of the cylinder liner. In order to prevent the slender parts such as the piston rod from bending or deforming, the stow should be balanced when placed.
    3. The disassembly of the hydraulic cylinder of the metal baler should be carried out in a clean and clean environment to prevent it from being polluted by surrounding dust, impurities and other dirt. The disassembled parts should be protected from dust (for example, the disassembled parts should be covered with plastic cloth, and it is forbidden to cover with cotton cloth and other industrial cloths).
    4. Before disassembling the oil cylinder of the metal baler, drain the oil in the two chambers of the oil cylinder.
    5. The disassembly must be carried out in order. Due to the different types of hydraulic cylinders, the disassembly sequence is also slightly different. Generally, the cylinder head must be disassembled first, and the piston and piston rod must be disassembled last. When disassembling the cylinder head of the oil cylinder, the end cover must be pushed out with screws. Hammering and hard prying is not allowed. When the piston and piston rod are difficult to withdraw, do not force it out. You must find out the reason before removing it. Forcibly driving out will cause scratches. mark.
    6. After disassembly, check carefully to determine which parts can continue to be used and which parts need to be repaired.

    The above are the precautions shared by Nick Machinery on the disassembly of the hydraulic cylinder of the metal baler. For more information on the metal baler, please pay attention to www.nkbaler.com

  • The hydraulic baler fully considers safety factors, and the electrical system is equipped with complete protection functions.
    (1) The main motor is protected against overload and short circuit by thermal relay and circuit breaker.
    (2) Conveyor motor thermal relay and fuse complete overload and short circuit protection.
    (3) The control cabinet is equipped with an emergency stop switch to stop the machine in time in an emergency.
    (4) Press and follow between "manual operation" and "automatic operation" (except when it is in working state). This makes the operation of waste paper Bale Compactor operation more convenient.
    (5) The control power supply on the control cabinet is DC 24VDC, which is safe and reliable to use.

    The hydraulic baler produced by Nick Machinery is simple in structure, safe and reliable, high in efficiency and reasonable in price. It is a good helper for your production.


  • The vertical hydraulic baler introduces the current advanced hydraulic baler production design and quality technical standards for production. The quality of the hydraulic baler is reliable and safe; it is widely used, stylish in appearance, and exquisite workmanship; multiple strapping slots, easy to operate, three breadboards, single-sided feeding, effectively avoiding wrong operation and causing damage; can be equipped Anti-rebound barb, equipped with safety switch and opening safety interlocking mechanism. The electrical control system of the hydraulic baler adopts electrical control components, which are easy to operate, durable, and can be used without debugging. Manual bundling, automatic turning over, rigid pressure plate structure, convenient for recycling a variety of waste materials, fast compaction, low noise, and efficiency When working with high, non-pressure stroke, the pressure plate automatically returns to the position without load to avoid the high oil pressure state to reduce the power. The packaging speed is fast, and it is widely used for packaging various fiber bags and woven bags. The storage and transportation of materials have brought great convenience and considerable economic benefits. We are willing to establish long-term cooperative relations with our customers to achieve a win-win situation.
    Worry-free after-sales: 1. Free delivery of wearing parts. 2. 24-hour service, time to help customers solve their urgent needs. 3. Different logistics are distributed in different regions to ensure that each machine is delivered to the customer in a short time. 4. After delivery, provide the tracking number and check the goods telephone number, so that customers can know the direction of their goods. Purchasing process: Pay a small deposit in advance, you can express logistics, and settle the balance after the goods arrive!

    Shaanxi Nick Machinery Equipment Co., Ltd. has been committed to the research, development and manufacturing of waste paper balers and hydraulic balers for many years, and has perfect after-sales service. Welcome to buy 86-29-86031588

  • Nick Machinery is a manufacturer specializing in the development, production and sales of hydraulic machinery and packaging machinery. The hydraulic packaging machine produced has a wide range of applications, high efficiency, and simple structure. It is an indispensable equipment in the waste recycling industry. Many new users may not understand, then Nick will introduce our hydraulic baler for everyone.
    1. Our hydraulic baler continues to innovate and improve. The side steel material of the new machine's bale outlet has been upgraded from the previous channel steel to the track bar steel, which is firmer and ensures that the compression path of the pressure plate will not deviate.
    2. Adopt 4-layer steel wire high-pressure oil pipe, wear-resistant, high density, thick wall pipe, to ensure no oil injection or oil leakage during work.
    3. Equipped with high-quality double copper coil motors to ensure the stable operation of the machine and the smooth preparation of the package after compression. The large motor controls the pressure of the main board, and the small motor controls the opening and closing of the door.
    4. Brand high-pressure plunger pump, high efficiency, low noise, high quality, the flow part from the inlet to the outlet of the pump is made of cast iron, the pump body is non-corrosive, and it is anti-wear hydraulic oil medium.
    5. An oil level thermometer is installed on the oil tank of the horizontal machine, which can pay attention to the oil level and temperature in real time to adjust the operation of the machine.
    6. Using PLC control system, the operation is simple and convenient, and it can also be controlled remotely. You can choose the control method according to your own habits.

    The above is a brief introduction about the structure of the hydraulic baler introduced by Nick. If you are interested in our baler, please contact our sales 86-29-86031588, please call.


  • «
  • 1
  • 2
  • ...
  • 8
  • 9
  • 10
  • 11
  • 12
  • ...
  • 104
  • 105
  • »
  • Shaanxi Nick Machinery Equipment Co. LTD
    TEL:86-29-86031588
    Fax:86-29-86031588 Sitemap
    Add:East Qunsheng Road Wuxi City,Jiangsu,China
    Email:sales@nkbaler.com
    WhatsApp:008615021631102
    Copyright © 2018 NKBALER .rights reserved
    Whats App Skype Shaanxi Nick Machinery
    Equipment Co. LTD