The wheat straw baler can automatically complete the picking, bundling and unwinding of pasture, rice, wheat and rubbed corn stalks. After the crops are bundled, it is convenient for transportation, storage and deep processing. The wheat straw baler can be matched with the wrapping machine to realize green storage. Envelope of feed. It occupies a small area, is easy to operate, and has high working efficiency, which meets the premise of saving time and labor. And the baling effect is compact, dense, and good in air permeability. The weight of a bale is about 300-500 kg. The compressed bale size is 1m×1.2m×long (1-1.5)m, which greatly reduces the storage space. Land area, increase transportation capacity, and reduce the possibility of fire. The straw baler has played a huge role in solving straw recycling, improving the environmental pollution caused by rural straw burning, and improving the quality of straw and grass utilization. The launch of this machine has been deeply loved by farmers and is a good helper for farmers to make a fortune.
If you need the straw to leave the field, it is best to transport it after baling. This saves cost and labor. You can choose the straw baler of Nick Machinery, which has stable performance and easy installation. Welcome to purchase: www.nkbaler.com.
1. Please confirm the power supply used by the machine, and don't insert the wrong power supply. This machine adopts three-phase four-wire system. The fancy wire is a grounded neutral wire for leakage protection.
2. Do not touch the heating plate directly with your hands.
3. Do not wash the machine with water. When the workplace is wet, the operator should not work barefoot.
4. Remember to unplug the power when the machine is not in use.
5. Do not change the parts on the machine at will.
6. The main parts should be lubricated with oil frequently.
Here, Nick Machinery recommends that you use it strictly in accordance with the product manual and do not ignore some small details to ensure safe and effective production. For more information about cotton baler, please pay attention to www.nkbaler.com
1. When designing pipes and piping, you should first consider the components, hydraulic components, pipe joints, and flanges to be connected according to the hydraulic schematic diagram.
2. The laying arrangement and direction of the pipelines of the automatic horizontal hydraulic baler should be neat and consistent, with clear levels. Try to use horizontal or vertical pipe layout. The non-parallelism of horizontal pipes should be ≤2/1000; the non-verticality of vertical pipes should be ≤ 2/400, use level to detect.
3. There should be a gap of more than 10mm between parallel or intersecting piping systems.
4. The pipeline configuration must make the pipeline, hydraulic valve and other components easy to load, unload, and maintain. Any section of pipeline or component in the system should be freely disassembled and assembled without affecting other components.
5. When piping the automatic horizontal hydraulic baler, the pipe must have certain rigidity and anti-vibration ability.
6. The weight of the pipeline should not be borne by valves, pumps and other hydraulic components and accessories; nor should the pipeline support the weight of heavier components.
7. The long pipeline of the fully automatic horizontal hydraulic baler must consider effective measures to prevent the stress caused by the expansion and contraction of the pipe due to temperature changes
Regarding the little knowledge of the hydraulic baler described by Nick Machinery above, does it help everyone to solve it well? If you have any relevant knowledge you don't understand, please contact us, we will give you a detailed answer, the hydraulic baler produced by our company is very complete, welcome everyone to visit and buy. www.nkbaler.com
2. It should be ensured that the hydraulic baler motor is well lubricated during operation. The general hydraulic baler motor runs for about 5000 hours, that is, the grease should be added or replaced. If the bearing is overheated or the grease has deteriorated during operation, the grease should be replaced in time . When replacing the grease, the old grease should be eliminated, and the oil grooves of the bearing and the bearing cover should be cleaned with gasoline, and then fill the cavity between the inner and outer rings of the bearing with 1/2 (for 2 poles) and 2/3 (for 2 poles) with grease. 4.6.8 pole).
3. When the running condition of the bearing is not good, the vibration and noise of the hydraulic baler motor will increase obviously. When the radial clearance of the bearing is checked for a certain value, the bearing is replaced.
4. When disassembling the hydraulic baler motor, prevent damage to the stator winding or insulation when the rotor exits from the stator shaft.
5. It is necessary to pay attention to the operation of the hydraulic baler motor in time. It is best to establish records to observe the current, temperature and lubrication conditions in time to ensure the normal operation of the hydraulic baler motor.
The above is the little knowledge about wool baler motor maintenance shared by Nick Machinery. If you want to know more about baler related knowledge, please pay attention to www.nkbaler.com
The value that the waste paper baler can reflect is obvious to all. The waste paper baler is mainly used for the
compression and packaging of waste paper and waste, so it can greatly alleviate the papermaking in terms of waste paper recycling. , The supply of industrial raw materials is insufficient. According to data, about 60% of Japan's papermaking raw materials are derived from waste paper, and its recycling rate is as high as 70%, which is a considerable number. And our Chinese The demand for paper is also growing rapidly. We can only continue to work hard to increase the domestic wood pulp production, as well as the amount of waste paper recycling, and the utilization rate of it.
In addition, the use of waste paper balers is more conducive to construction, resource conservation, and environmental protection. Effective use of these waste paper waste paper boxes can effectively reduce the felling of trees, the recycling and processing of waste paper, and its energy consumption, Water consumption, chemical consumption, and waste water pollution load will also be far lower than those of the original fiber pulping. It is more conducive to resource conservation and is a green project to protect the environment.
The waste paper baler better reflects the current paper industry and has excellent performance that can realize a circular economy. The recycling and reuse of waste paper and waste paper boxes effectively replace primary resources with renewable resources, such as wood, Straw, wheat straw, reeds, etc., can be recycled multiple times in the production process. This renewable resource is produced into different grades and different types of paper. This production technology is more trouble-free, reduces steps, and the process is not so. It is complicated, the pollution level is small, the impurity content of the paper is also small, low energy consumption, low waste, and low pollution.Isn't this more economical and more environmentally friendly?
Besides, the development speed of waste paper baler in recent years is also quite fast, and it is also more in line with China's strategic goal of sustainable development, recycling waste paper and waste, that is, saving resources, and environmental protection. In earlier years, The volume of waste items is huge, and they will become looser and messy without compression, and they cannot be better stored and transported. Now, the product of new technology, the multi-function waste paper baler made by Shaanxi Nick can not only improve transportation efficiency, but also save manpower. Material resources, saving money. Using our new intelligent environmental protection equipment, waste paper baler, through the recycling, processing, and reuse of waste paper, waste and other items, it can not only bring us benefits, but also save energy. Environmental protection.
Shaanxi Nick Machinery Equipment Co., Ltd. has been committed to the research, development and manufacturing of waste paper balers and hydraulic balers for many years, and has perfect after-sales service. Welcome to buy 86-29-86031588
This equipment belongs to a fully automatic straw compression baler. The equipment completes the whole straw scrap baling through the cooperation of the stroke switch and 4 hydraulic cylinders, and only needs to connect the bag, cover the bag, and tie the mouth manually. The equipment is divided into collection box, compression box, discharge port, main pressure head, side pressure head, push pack pressure head, hydraulic cylinder, hydraulic valve, electrical appliances and other components.
It is widely used in the green and dry storage of forage grass in animal husbandry. It can save storage space and extend the feeding time of green straw. After packaging and sealing, it will naturally ferment to produce probiotics, beneficial bacteria, lactic acid bacteria, and protein, which will be naturally fermented. Cattle and sheep and other livestock are easily absorbed after feeding, and the growth rate will increase 2%, which greatly reduces the cost of feed transportation and storage, and reduces the labor intensity of workers. It has brought tangible economic benefits to the animal husbandry industry. It is one of the necessary products for silage and yellow storage feed of medium and large aquaculture plants.
Shaanxi Nick Machinery Equipment Co., Ltd. is committed to the production of straw balers. The straw balers and fully automatic forage balers are of high quality and low price. If you need them, please log on to our website: www.nkbaler.com