Drawings of horizontal waste paper baler 2020-05-15

The horizontal waste paper packing machine is composed of seven parts: framework, box, hydraulic control system, main oil cylinder, oil supply system, electrical control system, hydraulic oil cylinder and hydraulic lock box door.


1. Rack
The frame is composed of a vertical pole, a lower beam, a middle beam and a top beam. The upper end and the lower side beam are connected to support all the racks with supporting points and bear complicated loads. Therefore, select high-quality stainless steel plates to ensure sufficient compressive strength.
2. Frame
The box is divided into 1 box and 1 shrink box. The door is connected by a locking cylinder, a door hinge uranium and other components. Lock the barrel to lock the door and loosen it to facilitate the door opening and closing. The negative part is placed under the gift box. The wooden floor is made of carbon steel plate, and the packaging of soldering iron and thin iron wire is convenient.
3. Hydraulic control system
The system is composed of fuel tank, gear pump (80 type) electric pump set, hydraulic multi-way valve, oil delivery pipe, and cylinder. Gear oil around 46 # must be applied. The system and electronic device components cooperate with each other, and can manipulate individual behaviors in every job of the waste paper packer.
4. Master cylinder
The main engine cylinder plug has a diameter of 160MM and its cross-section is 251CM2. The total working pressure of the waste paper packer is 800KN. The limit switch limits the lift of the plunger pump. The main cylinder system is composed of the main engine block, plunger pump, sealing ring, guide ring, top block, etc., with excellent sealing characteristics.
The plunger pump and the seamless pipe in the cylinder are welded and welded together, which has sufficient compressive strength. The plunger pump makes repeated movements in the cylinder. When the plunger pump rises, the force is transmitted to the top block in the small box, and the block in the small box is reduced.
5. Key oil supply system
This system is the energy source for the waste paper packer. Its advantages and disadvantages are particularly important for waste paper packers. Therefore, high-quality gear oil beyond 46 # must be applied. The system is composed of diesel fuel tank, 11KW motor, 80-type piston rod gasoline pump, ZS1 series hydraulic directional valve, speed regulating valve, unloading valve and filtering device.
6. Part of the electrical control system
The machine's main switching power supply is three-phase 380V 50Hz AC current. The cross section of the output power electric conductor shall not be less than 16mm2 (copper).
7. Working pressure cylinder
The effect of these is to feed raw materials into compression bags and preload them. Working pressure 20-25 MPA. The journey is 2700 MM.

For Details

Current status of domestic waste paper baler market 2020-05-13

Horizontal baler, fully automatic waste paper baler and semi-automatic waste paper baler industry are important basic pillar industries in China's national economy. It is also through the provision of energy-saving products, the development of energy-saving, water-saving, material-saving, intelligent high value-added products.
However, the energy-saving technology of domestic enterprises is still in its infancy, and it is more through simple technical improvements, supplemented by the reasonable configuration of parts and components, to create its own energy-saving and environmentally friendly products. Although these technical adjustments can control fuel consumption and reduce the emission index under the premise of ensuring stable costs, they cannot fundamentally bring about substantial changes to the energy saving road of the Chinese waste paper baler industry.
The hydraulic components are more likely to invade the sand during transportation. Direct installation will cause the normal application of the semi-automatic waste paper baler to be affected. Therefore, the performance of the more important components must be tested first before installation or debugging.

The uneven operation technology of baler in China is one of the difficulties that hinder the industry to achieve energy saving and consumption reduction. Therefore, how to help the baler to operate professional fuel-saving operation technology will become a major event to promote the sustainable development of the industry.for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time

For Details

100 tons hydraulic Baler cylinder diameter 2020-05-11

The key application of the hydraulic baler is to acquire the production and processing manufacturing industry and the metallurgical industry manufacturing industry. It can extrude various metal materials such as corner scraps, steel and wood shavings, scrap steel, scrap metal, scrap cables, scrap aluminum, aluminum wood shavings, car shells, and waste gasoline barrels. Rectangular, cylindrical and other pass-through waste materials. It is conducive to storage, transportation, refining and reuse.

The air also oxidizes the hydraulic oil air, accelerating the mildewing of the oil. To avoid air intrusion, pay attention to the following:
1. After overhauling and changing the oil, the air in the system software must be cleared according to the regulations before everything can work normally.
2. The oil suction pipe port of the hydraulic oil pump must not expose the oil surface, and the oil suction pipe line must be well sealed.
3. Maintain the excellent sealing of the rotating shaft of the gasoline pump. Pay attention to the application of the "lip" oil seal when replacing the oil seal at this place. You cannot use the "single lip" oil seal. Has the function of sealing gas

The selection of suitable hydraulic oil plays the role of transmitting working pressure, moistening, water cooling, and sealing in the hydraulic transmission system. Improper selection of hydraulic oil is the key reason for the initial common failures and reduced performance of the hydraulic transmission system. The hydraulic oil should be selected according to the model required in the application review book. When the unique condition must be used for oil replacement, the performance should be the same as the original model. Different types of hydraulic oil can not be mixed application, to prevent the hydraulic oil from causing exothermic reaction, the performance changes greatly. The dark red, milky white, heavy odor hydraulic oil is moldy oil and cannot be applied.

Shaanxi Nick machinery equipment can supply many kinds of baler machine

Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

For Details

How to maintain the quality of waste paper baler 2020-05-09

The first reason is that the product protection is better in the process of application. First of all, if you want to use this active packer in the process of using it, the effect must be better. Then you must pay attention to regular inspections. In the process of any problems, you must make timely repairs to prevent these minor problems from becoming serious Affecting its application, these are also some issues that need attention.
Secondly, there is one more thing to pay attention to in the application process, that is, it must be carried out strictly in accordance with the product operation standards during the operation process, so that it can also effectively prevent many problems in the application process, how to choose the appropriate There are many types of active balers used by the products they use themselves, and there will be certain differences in the raw materials used and the role of these products in the manufacturing process.

 The use of waste paper packers in the application process is better, so you must pay attention to the protection of the product in the application process, so that not only can you effectively ensure the quality of the product in the application process, but also in the application The process can also ensure the service life of the product, which can be said to be a double-edged work.
So how do we protect the product in the process of using this waste paper baler? How to protect the active paper baler such as waste paper baler? There are detailed application moments in the process of use, but many Some companies can often exceed the service life for a long time in the process of application.as more information ,please visit us :www.nickbaler.com 

For Details

Failure of the main cylinder of the waste paper Baling Machine not to back up 2020-05-09

In automatic mode, the cylinder of the waste paper Baling Machine will not retreat:

1. After checking whether the relay of the relay relay has been turned on, it should be damaged.
2. The lights of the switch parts at the rear of the cylinder are off and should not be turned on.
3. Check if the overrun limit is close to the switch indicator and should be turned off.
The manual mode of the main cylinder of the waste paper Baling Machine will not be returned
1. Check the manual back button.
2. Check whether the relay works normally.
The function of the waste paper baler determines the stability of the baler. Waste paper packing airport operation method The paper packing machine shown in the figure is a larger hydraulic equipment, which also has certain requirements on the R & D and design site.
1. The site should be large enough, the size and volume of the carton packing machine are large, and the supporting conveyor also occupies a large position. Before purchasing equipment, the workshops required for R & D and production should be prepared in advance, and in addition, simple planning should be made according to the size of the equipment.
2. To carry out ground treatment, the paper shell baler is fixed, and the ground plane can make the equipment run more stable, and follow-up installation and maintenance work.if you need to know more information ,please visit us : www.nkbaler.com or whatsapp :+86 1502163 1102

For Details

plastic bottle baling machines 2020-04-26

 Speaking of plastic bottle baling machines, many of our friends are no strangers. The economic development and technological advancement have played a leading role in the development of the performance of plastic bottle baling machines. Plastic bottle packing machine is an electromechanical integration product, mainly composed of mechanical system, control system, feeding system and power system. The whole packaging process is composed of auxiliary time such as pressing, returning, lifting, transferring, ascending, ascending, and receiving. Plastic bottle packing machine This product has the characteristics of good rigidity and stability, beautiful appearance, easy operation and maintenance, safety and energy saving, low investment cost of equipment basic engineering and so on. It is widely used in various types of waste paper mills, old waste recycling companies and other unit enterprises. It is suitable for packaging and recycling of old waste paper and plastic straws. It is a good equipment for improving labor efficiency, reducing labor intensity, saving manpower, and reducing transportation costs. The plastic bottle baling machine squeezes waste paper and similar products under normal conditions and packs them with special packaging tapes, which greatly reduces the volume, thereby reducing the transportation volume, saving freight, and increasing the benefits for enterprises. Introduced advanced technology and advanced technology of similar products at home and abroad.

       We have summed up our experience for many years to tell you that we can solve some problems by ourselves, such as imperfect accessories and cutter head problems. Let's take a look at these simple questions. First, check whether the photocell of the plastic bottle baling machine device is complete, whether the reflector is aligned, and whether there is dust on it. If there is no alignment, it should be aligned in the correct position immediately To remove the dust above. It is also necessary to check whether the screws and nuts of the components of the plastic bottle packing machine are loose, and if so, they should be fixed in time. as more information ,please visit : www.nkbaler.com 

For Details