The way out of abandoned rural straw 2021-01-14

Nick brand straw baler baler is safe and reliable, low power consumption, economical and reasonable, easy to use, simple maintenance and operation, it is a good helper for your production.
Every October, when most of the corn is harvested in northern my country, the corn can be broken home and sold for money, so what can corn stalks do?

Fortunately in the past, there were wood stoves in rural areas that could be burned, but now the popularity of gas stoves and induction cookers makes wood stoves almost useless, so only straw can be returned to the field, but this will easily cause land clumping. Burn it, the country is not allowed to make these straws useless, and it has become a problem.

In fact, corn stover has many uses, but it is difficult to collect. Moreover, farmers feel that they don't have much straw at home, and it is too troublesome to sell a little straw, and they don't want to move.
In order to solve the problem of straw collection, a village began to use straw balers on a trial basis. Each machine can pack 40 mu per day, and the farmers are charged 20 yuan per mu. The baled grass is sold to the grass station for 160 yuan/ton.
From an economic point of view, the straw baler greatly improves work efficiency, reduces the link of purchasing and storage, and also reduces the cost, thereby promoting the formation of a market-oriented purchasing and storage mechanism. From the perspective of environmental protection, the use of straw balers reduces the weeds piled up in the fields, protects river water conservancy, and further consolidates the results of village environmental improvement.

Therefore, it is imperative to promote corn stalk balers, so that farmers can obtain economic benefits, so as to promote their enthusiasm and solve the problem of disorderly stacking of straws everywhere.

Nick brand straw baler baler is safe and reliable, low power consumption, economical and reasonable, easy to use, simple maintenance and operation, it is a good helper for your production.
Company website: www.nkbaler.com, Tel: 86-29-86031588

For Details

Knife edge inspection of hydraulic scrap metal shearing machine 2021-01-11

Nick brand hydraulic scrap metal shearing machine is simple to operate, easy to use, automatic out of the package, perfect after-sales, is your best choice.

Conscientiously implementing the hydraulic scrap metal shearing machine maintenance system and strictly abiding by the safety operating procedures are necessary conditions for extending the service life of the machine, improving production efficiency and ensuring safe production. For this reason, it is recommended that users establish hydraulic shearing machine maintenance and safe operating procedures , The operator should be familiar with the machine structure and operation process, and pay attention to checking the knife edge.

Knife edge inspection of hydraulic scrap metal shearing machine:

The material to be cut is strictly prohibited to exceed the specification range specified in this manual. When cutting irregular metal scraps, prevent any metal material from pressing any part of the machine before work, and promptly remove the materials on the cutting platform and inside the frame to avoid damage to the machine and cause unnecessary losses.
The hydraulic scrap metal shearing machine should pay attention to inspection before and after work. Safety production is the first element to protect personal safety. Nick is an environmentally friendly company specializing in the production of metal shears, metal balers and other equipment. Concentrate on creating professionalism, honesty creates reputation, and service creates sales. For our bright future, we look forward to seeing and patronizing new and old customers.
Company website: www.nkbaler.com, Tel: 86-29-86031588

For Details

How does the waste paper baler realize efficient production? 2021-01-11

Nick Machinery’s waste paper baler has superior performance, excellent quality, safe production, and automatic package delivery, which can better improve your production efficiency.

What conditions determine the working efficiency of a waste paper baler? Today, Nick Machinery will introduce to you how the waste paper baler can achieve efficient production.

1. The most direct factor influencing the production efficiency of waste paper baler: the type standard of baling. Different standards directly determine the production efficiency of the baler.
2. The efficient production of horizontal waste paper baler is also inseparable from the cylinder function of the baler. The function of the cylinder determines the stability of the baler. To ensure the efficient production function of the baler, you must choose a baler manufacturer with deep cylinder production technology.
3. The quality of the hydraulic oil selected by the baler directly determines whether the cylinder can exert its maximum effect, and also directly affects the failure rate and service life of the cylinder.

To ensure the efficient production of the baler, it is necessary to use high-quality genuine No. 46 anti-wear hydraulic oil.

If you want to improve the production efficiency of the waste paper baler, you must choose the right product, a cylinder with better performance, and high-quality hydraulic oil. Nick Machinery’s waste paper baler has superior performance, excellent quality, safe production, and automatic package delivery, which can better improve your production efficiency. Company website: www.nkbaler.com, Tel: 86-29-86031588

For Details

Matters needing attention in the operation of waste paper baler 2021-01-11

The Nick brand waste paper baler is simple to operate and automatically discharges the bale, which improves work efficiency. The installation of emergency stop settings makes the operation safer and perfect after-sales.

The waste paper baler is used to squeeze waste paper and similar products under normal conditions, and pack them into a special packaging tape to greatly reduce the volume, thereby reducing transportation volume, saving freight, and increasing benefits for enterprises.

Next, Nick Machinery will talk about what should be paid attention to when operating it. I hope it will be helpful to you.
1. During the operation of the waste paper baler, it is strictly forbidden to clean up materials and wipe the machine. When the materials are jammed by the machine, they should be shut down immediately for processing.
2. Two or more people should have a clear division of labor to prevent accidents caused by confusion.
3. It is strictly forbidden to twist the parts, pumps, meters and valves on the machine at will. Adjustments and repairs must be carried out by experienced technicians after being familiar with this manual.

4. After the bale is pressed in place, the bale should be tied up, and the small door can be opened after the bundling is completed to avoid danger.

5. After the small door is closed properly, the press head can move forward and start door Baler; the operator should leave the opening angle range of the small door when the press head moves forward and packs.
The Nick brand waste paper baler is simple to operate and automatically discharges the bale, which improves work efficiency. The installation of emergency stop settings makes the operation safer and perfect after-sales.
Company website: www.nkbaler.com, Tel: 86-29-86031588

For Details

What can the aluminum chip briquetting machine do? 2021-01-10

According to the actual needs of everyone, the Nick brand aluminum chip briquetting machine has been recognized by many customers with high-quality qualifications and professional technology, and is worthy of trust.

The briquetting machine is an indispensable environmental protection equipment for metal chip waste treatment. With the advancement of solid waste treatment, market demand has begun to blow out.

In order to further meet market demand, Nick Machinery is increasingly improving equipment including balers, crushers, cake presses and other equipment to help break the bottleneck of scrap recycling in the manufacturing industry and promote the harmony of economic, social and environmental benefits.

The aluminum scrap briquetting machine is mainly used to directly cold press aluminum scraps and other metal materials into cylindrical cakes of 3 to 70 kg under high pressure, so as to facilitate storage and transportation and reduce the loss in the process of recycling and reuse.

Since its development, Nick Machinery’s business areas cover environmental problem solving, renewable energy development, recycling of renewable resources, reprocessing and sales, undertaking of environmental sanitation and environmental protection projects, and manufacturing and sales of environmental protection equipment.
Provide solutions to environmental problems, recycling and treatment of regenerated materials, and more stable recycling equipment to help customers improve recycling efficiency and save recycling costs.
"Technology creates a better environment". In the future development, Nick Machinery will continue to uphold the new era goal concept of making greater contributions to the environmental cause, research and develop more advanced, more efficient and energy-saving environmentally friendly regenerated materials processing equipment.

Develop cleaner renewable energy and make more contributions to a green earth.

If you have requirements, please contact us. Company website: www.nkbaler.com, Tel: 86-29-86031588

For Details

How to choose rice husk baler 2021-01-10

Nick's high-end technology makes the straw baler more adapt to the development of the times and provide you with better services.
In daily life, we need a rice husk packer to pack rice husk, wood chips, cottonseed and other materials. How should we choose? There are so many packers on the market, which one is really suitable for you?

1. Look at the website: A good rice husk packing machine manufacturer will pay great attention to its own company image, including website image.

2. Look at qualifications: Many companies do not have their own core technology, or even a technical team. They just take orders through the Internet or other channels, and then transfer machines from other rice husk packing machine manufacturers and post their own brands.
This type of company is also undesirable, and product quality and after-sales service are not guaranteed, so it is not worth recommending.
3. Look at the plant: This is to avoid the second problem, and at the same time, to roughly measure the strength of the company. The plant of an enterprise determines the strength of the company.

4. Look at the technical team: Many companies do not have core technology. They use drawings purchased from outside and then manufacture rice husk balers according to the drawings.

5. Look at after-sales service: The more an enterprise attaches importance to after-sales service, the stronger the company’s capabilities, because quality and service are a very important factor for testing the strength and long-term development of an enterprise.
Shaanxi Nick Machinery Equipment Co., Ltd. is a company specializing in the production of rice husk balers, straw balers, plastic bottle balers, fiber balers and other environmentally friendly products for many years. Concentrate on creating professionalism, honesty and reputation, service for sales, for our beauty Tomorrow, we look forward to seeing and patronizing new and old customers. Company website: www.nkbaler.com, Tel: 86-29-86031588

For Details