Shaanxi Nick Machinery
Equipment Co. LTD
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Industry News Your current location:Home >> Industry News
  • The cylinder of the vertical baler adopts a fixed cylinder. When it is necessary to continuously rotate with the working mechanism, a rotary oil cylinder should be selected. When the piston rod is required to move in an arc in addition to linear motion, shaft pin cylinders are used. It is related to the use occasion and the stroke of the mechanism, but generally the full stroke is not selected to prevent the piston and the cylinder head from colliding. If it is used for clamping mechanism, etc., a margin of 10-20 mm should be added according to the calculated stroke. Determine the thrust and pulling force output by the cylinder according to the size of the load force. Generally, the force of the cylinder is required for the theoretical balance of the external load, and different load rates are selected according to different speeds, so that the output force of the cylinder has a little margin. When designing the fixture, the force expansion mechanism should be used as much as possible to reduce the overall size of the cylinder.
    So what are the main differences between the dual hydraulic cylinder vertical waste paper baler equipment and the single cylinder under the same thrust? In fact, the two production principles are basically the same except for the number of cylinders. When the thrust requirement is large, the strength of the equipment itself needs to be increased so that the equipment can withstand sufficient pressure. The advantages of the double-cylinder vertical baler are as follows:
    1. It can be that the compressed material receives a balanced force, the force on both sides is even, and the Baling Press effect is better under the same conditions. This effect is very obvious when Baling Press harder materials such as plastic bottles.
    2. Because of the uniform force, various types of raw materials can be packaged. Such as straw, cotton, quilt, etc. Increasing the maximum thrust of each cylinder can make the entire equipment have greater thrust. Common single-cylinder vertical balers generally have three thrusts of 150KN, 300KN, and 450KN, while the maximum thrust of double-cylinder vertical waste paper balers are 600KN, 800KN, and 1000KN. Other special requirements can be designed for greater thrust.

    3. The double-cylinder vertical waste paper baler has advantages and disadvantages. The principle of using mechanical equipment is that the simpler the better, the more complex the equipment, the easier it is to malfunction. So what are the main faults that occur in double cylinders? For the double-cylinder structure baler, the most common daily failure is that when the compressed raw materials are obviously unbalanced on both sides, it is easy to cause the reaction forces of the two cylinders to be different, resulting in cylinder jams and causing damage to the cylinder piston rod. damage. Attention should be paid in production operations. Pay attention to daily operation methods.

    After the above points of explanation, when you choose a vertical waste paper baler, you can have a considerable choice. When choosing a machine, try to investigate and understand as much as possible, check the quality of the equipment more, and choose the most suitable mechanical equipment of your
  • With the increasing awareness of environmental protection, the vertical hydraulic baler has played a great role. Some waste paper can be reused, and it is becoming more and more accepted by everyone. The domestic vertical hydraulic baler has been constantly increasing. The innovation of the company is constantly following the development of some advanced foreign technologies.
    The vertical hydraulic baler product has the characteristics of good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in all kinds of waste paper factories, old waste recycling companies and other units and enterprises. It is suitable for packaging and recycling old waste paper, plastics, etc. The vertical hydraulic baler improves labor efficiency, reduces labor intensity, saves manpower, and reduces transportation costs. Good equipment.

    The vertical hydraulic baler can be applied to all light foaming and loose materials such as waste paper, waste paper boxes, waste cardboard, bark, waste plastic bags, plastic bottles, etc. The bag is compact, neat and beautiful, and can greatly reduce transportation costs. It is an indispensable production tool for cotton producing areas, textile companies, supermarkets, clothing factories, waste materials recycling industries and other various light industrial enterprises. The waste paper box baler can be adjusted according to the needs of the user, and the user is the center to make the hydraulic baler equipment suitable for the user.

    Nick Machinery's vertical hydraulic baler gives full play to the value of its own waste utilization. Improve work efficiency and create greater profits for
  • In the current era of rapid development, every company is considering its own production costs and user experience. In mechanical production, how to present automation, replace manual operations with lower work efficiency, and reduce human resource costs has become a major core. . The carton Baler is a hydraulic Baler equipment that is used to squeeze waste paper and similar products under normal conditions and pack them into a special packaging belt. It is used for the recovery, compression and packaging of waste paper, paper skin, garbage and other materials. Greatly reduce the volume of materials, so as to achieve the purpose of reducing transportation volume, saving freight, and increasing benefits for the enterprise. The recycling of waste paper can greatly reduce the consumption of forest trees, water, electricity and pollutant discharge.

    The main advantages of the carton Baler in assembly line production are good start-up and speed regulation performance, and strong overload capacity. For the carton Baler equipment, in addition to selecting the opening pressure reasonably according to the needs, special attention should be paid to the work. When the flow through the one-way valve is much smaller than the rated flow, the one-way valve sometimes vibrates, and the smaller the flow is, the smaller the flow is to open The higher the pressure, the more gas in the oil, the easier it is to produce vibration, which is also necessary to pay attention to when using it.

    Nick brand carton Baler has good rigidity and stability, beautiful appearance, convenient operation and maintenance, safe and energy-saving, and can also pack a beautiful packaging shape for you.
  • The shaving briquetting machine adopts hydraulic transmission and control system. It has a high degree of automation, stable speed, high output and simple operation. It is suitable for compression and packaging of sawdust, wood shavings, cottonseed husks, corn cobs and other materials. It is compressed into bags at one time, which is convenient for storage and reduces transportation costs. After being compressed, it is easy to loosen when taken out. It can also be used for environmentally-friendly building materials, agricultural fertilizers, mushroom cultivation, etc. The size and shape of the compression chamber can be made according to user requirements.
    The shavings briquetting machine is a new type of environmentally friendly energy-saving shavings briquetting machine with a relatively favorable price in the current series of baler equipment. After strict quality control in our production process, the shavings briquetting machine is continuously technologically improved. And innovation makes the produced scrap briquetting machine more durable. Our shaving briquetting machine has low discharge fineness, low noise, energy-saving and power-saving, convenient and fast. A shaving briquetting machine is equivalent to the old-fashioned shaving briquetting machine. And the cost of use is greatly reduced

    The particle briquetting machine is based on the inherent movement of the machine. The motor (or diesel engine) drives the gear to transmit to the main shaft. Under the action of friction, the pressure roller rotates, and the corresponding friction temperature is generated between the pressure roller and the pressure mold. , The powdery material is plasticized, and the protein fat is subjected to temperature denaturation. It is extruded from the die hole under the extrusion of the pressure wheel. The required particle length can be obtained by adjusting the cutter, and then the material will be made by the spinning plate. The particles are sent out of the machine through the discharge port.

    Nick Machinery will adhere to the principles of quality assurance, honesty and trustworthiness; adhere to the open development strategy and serve customers wholeheartedly. All walks of life are welcome to visit the company for cooperation and win-win cooperation!

  • In recent years, the recycling of waste foam has received more and more attention in China. Not only is the country vigorously advocating environmental protection and energy saving in recent years, but more and more people see business opportunities from it and invest in the EPS waste foam recycling industry. How big is the profit? Is there any secret to investing? Can all foam waste be processed? Today, I will take you to learn more about the benefits of foam recovery equipment.
    There are many types of waste foam garbage in cities. There are three types of foam made of EPE pearl cotton, EPS, and PU. PE foam is mainly used for packaging and buffering, and more used for fragile products such as electronic products and agricultural and sideline products. PS foam is divided into two types: EPS and XPS. The former can be seen everywhere in life. It is the white foam for packaging. The most common is the food packaging box. The latter is usually used as a building material as a thermal insulation board. ; PU foam is used for furniture (sponge) and thermal insulation.

    At present, we mainly process two kinds of foams, PE and PS. The ratio of crushing and extruding them into blocks with a foam compressor can be reduced by 50 times, while PU type foams can only be crushed for filling materials, such as toys, Sofas, cushion chairs in the automotive industry, etc. are filled with waste. At present, the profit margin of foam recycling and granulation in China is still very large, because labor is relatively cheap, raw materials are more common, and the domestic recycling system is far less developed than in Europe and the United States. After all, there are few people engaged in it. In the expanding plastic products market, the demand for PS recycled materials will continue to increase. Therefore, the demand and application of foam balers is a trend. There are not only great business opportunities but also greatly reducing white waste. In response to the national green environmental protection policy, Make a contribution to the global environmental protection cause.

    Nick Machinery has been specialized in foam Balers for many years, actively absorbing advanced experience and independent innovation of high-tech achievements. Tailor-made foam Balers suitable for local factors for enterprises, and strive to satisfy users in many
  • To be a waste paper recycling station, there are several issues to think clearly. How can making a waste paper baler make money? These results can be processed, as long as I work harder. The mastery of the benefits is very large. Don't be afraid of the head and tail, and be constantly in the ranks of looking forward.
    First, investigate the amount of waste paper that can be recycled every day in the surrounding markets and the types of waste paper. The resolution is mainly based on the recycling of waste paper of any type. Waste paper includes book paper, newspapers, waste paper boxes, etc. It can also recycle various waste materials such as mineral water bottles, oil cans, and straws. Choose a secondary industry.
    Second, find a good market. All kinds of recycled waste paper are eventually sent to paper mills to stop processing and then consume. Therefore, find the most recently priced waste paper mill or perhaps a larger waste paper baler station. Without a market, recycling waste paper will not be profitable.

    Third, promote related equipment. The quality of these equipment must be guaranteed, which can bring value in use, and cannot be repaired every day, which affects my consumption.

    Fourth, working capital preparation. Regarding the cost of the site, the situation varies from place to place. According to the average level, it is 50,000 yuan per year, equipment investment is about 150,000 yuan, and 40 tons of waste paper baler per day. It is estimated that the daily profit can be about 4000 yuan (evenness). Total investment = 50,000 yuan (site) + 150,000 yuan of equipment + 100,000 yuan of working capital (funds required for one-week turnover). The total investment is about 300,000 yuan.
    Nick Machinery recommends that the waste paper packaging site is more than 500 square meters. The stacking of raw waste paper, fine picking, the installation of the baler and the stacking of finished products all require a site. At the same time, the manufacturer’s friendly reminder: take fire protection measures! ! ! If you still don’t understand, please inquire about our business 86-29-86031588
  • «
  • 1
  • 2
  • ...
  • 13
  • 14
  • 15
  • 16
  • 17
  • ...
  • 50
  • 51
  • »
  • Shaanxi Nick Machinery Equipment Co. LTD
    Add:East Qunsheng Road Wuxi City,Jiangsu,China
    Copyright © 2018 NKBALER .rights reserved sitemap.html
    Whats App Skype Shaanxi Nick Machinery
    Equipment Co. LTD