Shaanxi Nick Machinery
Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Industry News Your current location:Home >> Industry News
  • Copper is a relatively soft metal with better ductility. It is widely used in electronics, machinery, construction, light industry, wire and other industries. With the development of the economy, the demand for copper is increasing. Although my country is rich in copper resources, there are relatively few exploitable resources. In order to maintain the demand for social development, it is necessary to recycle and reuse the copper scrap. The scrap copper briquetting machine is a necessary equipment for scrap copper recycling and reuse. Many people are investigating and purchasing. How much is a scrap copper briquetting machine? Money, what models do you have
    The fluffy copper scrap and copper scraps are directly recycled and the smelting oxidation rate is only 50%, which not only leads to the production of a large amount of copper slag, but also consumes a lot of heat; if the copper scrap is packed with a density of about 0.6-1T/m3, it is used for smelting. The oxidation rate is about 30-40%, which is difficult to achieve the effect of reducing the smelting loss rate; and the density of the copper scraps is as high as 1.9-2.1T/m3 after the scrap copper briquetting machine is used, and the smelting oxidation rate and copper ingot are directly recovered The melting loss rate is very close, not only the heat transfer rate is very fast, but also it is easy to turn into copper water.
    So how much is such a high-efficiency and energy-saving copper scrap briquetting machine? This has a lot to do with its model, automation and customer requirements. There are several models of 200-1200 tons of copper scrap briquetting machine, generally 200 -630 tons are mostly used, which is more suitable for public demand, and the price is low. The metal briquetting machine is mainly used to press various metal scraps, powdery granular metal powder, smelting additives, sponge iron, etc. into high-density cylindrical cakes without adding any binders. The density of the cakes can reach 5T/ Above M3, the pressed cake can be directly used in the furnace, and the cast iron grade can reach HT200-250, and the cost of each ton of casting can be saved about 700 yuan. Hydraulic baler is mainly suitable for steel mills, recycling and processing industries, and non-ferrous and ferrous metal smelting industries. The hydraulic baler can squeeze all kinds of metal scraps into the qualified charge of various shapes such as cuboid, octagon, cylinder, etc., which can reduce the transportation and smelting cost and increase the furnace casting speed. The price of 200-630 tons is between 80,000 and 300,000 tons, and they are generally available from stock. If the customer has other special requirements, special customization is required. The price has not changed much, but it needs to wait. After all, it needs to be redesigned and produced.

    Now the price of copper scrap briquetting machine is relatively transparent. If you want to get the recognition and trust of customers, you need to start from customer needs, so that copper scrap briquetting machine can truly create value for customers. The price war is no longer dominant, and the quality of equipment is the key to mutual cooperation. To learn more about the Baler, you can directly communicate with our sales staff 86-29-86031588


  • The loss of any part of the automatic baler may affect the complete operation of the entire equipment. Therefore, more maintenance and timely handling in the event of a failure can maintain its work efficiency.
    Why did a simple failure of a fully automatic packaging machine turn into a big problem in the end? There are five reasons.
    ①Although you see that the automatic packaging machine is malfunctioning, don't care and turn a blind eye;
    ②Think that such problems as the automatic packaging machine do not exist and are regarded as disregarded;
    ③Insufficient skill level, no defects can be seen;
    ④ Regardless of the problem with the automatic baler, it is about to get off work and wait for the successor to do it. Torai's thoughts are serious;
    ⑤When dealing with the problem of the automatic packaging machine failure, it hastily, not attentively or carefully.

    Here, Nick Machinery recommends that you do a good job in the daily inspection and maintenance of the baler, and take good care of it, so that the baler can create more profits for you.www.nkbaler.com

  • Tires (such as car tires, truck tires, etc.) are ground-to-ring elastic rubber products assembled on various vehicles or machinery, so tires are a material with high resilience. The tire baler is a vertical heavy-duty double-cylinder baler specially used for compressing and packaging automobile tires, truck tires and other products. In terms of design, the tire baler fully considers the high rebound of the tire after compression, and especially strengthens the strength of the fuselage so as to offset the high rebound of the tire after compression.
    The vertical design of the tire baler has a small footprint and is widely used in tire recycling centers. It is one of the necessary machines in the waste tire recycling industry. Using a tire Baler to compress tires can greatly save storage space and reduce transportation costs.
    The standard NKO tire baler has a compression ratio of up to 12:1 and a bale weight of 1200kg. The high-equipped tire balers not only have the various performances and advantages of the standard tire balers, but also increase the cooling system and improve the hydraulic system. As far as Baling Press efficiency is concerned, a high-end tire Baling Press machine can produce a block containing 120-140 car tires through 7 times of feeding and compression. The machine's no-load cycle time is only 35 seconds.
    The tire bales compressed by the tire baler are widely used in the construction of sound insulation walls, urban greening facilities, lightweight roadbed fillers and other civil engineering.
    Machine applications: car tires, truck tires, bicycle tires, motorcycle tires, etc.

    Nick Machinery's tire baler has undergone more than ten years of development and has formed a variety of models to keep up with the market. 86-29-86031588

  • As an important equipment in cotton processing enterprises, cotton baler is irreplaceable in its role and status. The control system plays a decisive role in the normal production of cotton baler. Since my country implemented the reform of cotton quality inspection and physique, the control systems of many domestic cotton balers have been unable to meet the requirements of actual production, and it is imperative to update. After investigating and analyzing the production process of cotton baler, the structure of the baler and the production environment, a control system using programmable logic controller (PLC) as the main control unit is proposed to replace the original relay-contact control system. Plan. Taking the realization of the PLC control system as the research focus, carefully analyzed the control requirements of the cotton baler, designed a PLC-based control system, and completed the system's hardware design, software program design and man-machine interface monitoring system design. The method of controlling and adjusting the bale weight of the cotton baler is analyzed, and the method of pressure measurement is used to control the bale weight. The pressure transmitter is used to collect the pre-pressure signal of treading cotton, and the digital quantity obtained after A/D conversion is compared with the internal setting value of the PLC to determine whether the weight of the bale reaches the requirement. In addition, the influence of moisture regain on the weight of the cotton bale is also considered, the moisture regain of the cotton bale is tested, and the weight of the cotton bale is adjusted according to the test results. The factors affecting the reliability of the cotton baler control system are analyzed. According to the analysis results, the main factors affecting the reliability of the control system of the cotton baler are divided into two types: field interference and system failure. Combined with the on-site working conditions of the baler, a series of related measures to improve the reliability of the control system of the cotton baler are proposed.

    Nick Machinery has been engaged in the research and production of cotton baler for many years. It has a professional R&D team and after-sales team. The professional craftsmanship has been recognized by many customers and is trustworthy.


  • The aluminum scrap baler is a hydraulically driven device that compresses and bales metal scrap, scrap aluminum, scrap copper, scrap iron, steel shavings and other metal materials. It uses hydraulic transmission to work smoothly, safely and reliably. Using manual or PLC control system, the machine operation is simpler. The installation is more convenient, no foot screws are needed, and diesel can be used to start in places without power. There are two forms of package delivery: flip package and push package. So with the advancement of society and the development of science and technology, our scrap aluminum baler is also constantly innovating. Compared with traditional baler, what are the advantages of our equipment? Next, Nick Machinery will take everyone to understand:
    The 300-ton waste aluminum baler cylinder is thicker and has greater pressure than the previous cylinders, from the original single cylinder with an inner diameter of 220mm thickened to a single cylinder with an inner diameter of 250mm-320mm, and adopts double cylinders or three cylinders. The upper steel is thickened and widened accordingly. The overall weight is heavier, which makes the vertical aluminum scrap baler more durable.
    The 300-ton aluminum scrap baler has a wider range of applications: it is suitable for packaging scrap aluminum, aluminum alloy doors and windows, aluminum alloy profiles, and can also pack scrap iron, paint buckets, bicycle racks, motorcycle racks, electric vehicle racks, and scrap aluminum alloys. , Aluminum materials, waste paper, waste plastics, etc., have the advantages of one machine for multiple uses, low investment, and wide application range.
    The design of the 300-ton waste aluminum baler is more reasonable, all of which are hydraulically driven. The size of the feeding box and the shape and size of the bale can be customized according to the user's raw material specifications.

    If you need to deal with waste aluminum, aluminum alloy doors and windows and other materials, you can contact our sales staff 86-29-86031588, we can provide you with the most suitable waste recycling solutions.

  • Features:

    1. All models are hydraulically driven,

    2.All oil cylinders adopt imported material sealing ring, which is reliable in quality and good in quality

    3. Ways of discharging form such as manual bag taking/automatically turning over;

    4.Using top-mounted cylinder, easy to install, easy to maintain, no foundation, high Baler efficiency.

    5.There are multiple grades of extrusion force from 10 tons to 100 tons for users to choose

    6.The size of the compression chamber and the size of the block can be customized according to customer requirements.

    7.The pusher cylinder and the pusher head are connected by a spherical structure, which has good reliability and long service life of the oil seal.

    8. Low noise hydraulic circuit design, high efficiency and low failure.

    9.Practical models, suitable for small and medium-sized enterprises waste compression packaging.

    10. Stand-alone use without auxiliary equipment.

    11.It has good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safe and energy-saving.

    The above are the product features of the woven bag baler introduced by Nick Machinery. For more detailed parameters of the baler, please visit the Nick website www.nkbaler.com

  • «
  • 1
  • 2
  • ...
  • 14
  • 15
  • 16
  • 17
  • 18
  • ...
  • 50
  • 51
  • »
  • Shaanxi Nick Machinery Equipment Co. LTD
    TEL:86-29-86031588
    Fax:86-29-86031588
    Add:East Qunsheng Road Wuxi City,Jiangsu,China
    Email:sales@nkbaler.com
    WhatsApp:008615021631102
    Copyright © 2018 NKBALER .rights reserved sitemap.html
    Whats App Skype Shaanxi Nick Machinery
    Equipment Co. LTD