Operation method of waste plastic baler
Waste plastic baler, PET bottle baler, mineral water bottle baler
1. During the production process of the waste plastic baler, check the quality of the product at any time, and adjust it at any time if there is any problem.
2. If there is a problem with the equipment or the product quality is not up to standard during the production process, the waste plastic baler should be turned off immediately to solve the problem. It is strictly forbidden to deal with problems during the operation of the machine to prevent accidents.
3. The operator of the waste plastic baler must cut off the power supply of the machine and equipment.
4. The operator can only operate on the touch screen of the waste plastic baler machine with clean fingers. It is forbidden to tap or hit the touch screen with fingertips, nails or other hard objects, otherwise the touch screen may be damaged due to improper operation.
5. When debugging the machine or adjusting the quality of the bag making, the quality of opening the package, the filling effect, and the display of the bag and package on the vehicle, only the manual switch can be used for debugging. When the machine is running, it is strictly forbidden to perform the above debugging to avoid safety accidents.
After reading this article, you should have a basic understanding and understanding of the use, installation and operation of waste plastic balers. If you want to know more, then go to the Nick Machinery website to learn more, https://www.nkbaler.com
Post time: Aug-17-2023